[WTS] M0110 PCBs for Nice!Nano (Pro Micro)

[IonutZ]

Hey folks, I'm working on restoring an Apple M0110 and found gerber files for a Pro Micro footprint PCB that works with these long stem alps. I spent a bunch of money to print a few of these on 1.6mm PCBs with thick ENIG surface finish - these feel really nice. I also spent some time to get the ZMK firmware configuration working for this layout and with ZMK Studio (hot reload config).

What you'll need is
1. 1N4148 diodes
2. a Nice!Nano (v2) if you want bluetooth or a Pro Micro for wired
3. Optional - 3.7v LIPO
4. Optional - 1p2t Switch (using https://www.amazon.com/dp/B00E6QJ6YK)
5. Optional - USB-C female / male headers (using https://www.amazon.com/dp/B091CRLJM2)

ZMK Config: https://github.com/IonCaza/m0110zmk/

I can also provide STL files for an USB-C housing and a switch housing (assuming bluetooth).

I have 6 PCBs to sell.

$50/pcb + Shipping + G&S Fees
2+ $45/pcb + same as above

Pictures and timestamp here: https://imgur.com/a/jnHcqxF





I also have some additional parts for M0110, a case, a plate, a bunch of switches (in various working condition), and a set of caps - DM me if interested.