Page 1 of 1

Build Log of a WhiteFox

Posted: 20 Jun 2016, 09:45
by Thumper
I received my WhiteFox on Saturday and couldn't be happier.
It's build with Linear Zealious R1 which are stickered and lubed.

A big shoutout to Matt3o for this project. You raised the bar on a height which is really hard to top.
Spoiler:
Package of the WhiteFox
Image

The Keycaps
Image
Choosed OG Cherry Doubleshots in German layout, combined with GMK Blue Galoo, GMK CYMK and an Gateron PBT Spacebar

The Switches
Image
Linear Zealios Round 1 - Springswapped to 55g, lubed, stickered

WhiteFox Case
Image
The package is more than superb.

Bonus: Cable
Image
Although i ordered some Pexon Cables i forgot that the whitefox has a really thight usb slot. The Plug of my Pexon cables was a big to big.

Here should be keycaps...
Image
But i had the Barebone, so only a box for me.

Feets, Screws, Rubber
Image
Image
Image
Image

Those engravings are top notch.
Image
The small hole is for the flash-button.

USB-Connector + Feet
Image

WF1.02a
Image
Image
Image
Image
Image
Image

Such a beauty
Image
Image
Image

Solder points of the Switches
Image

LEDs unsoldered
Image
Image

LEDs soldered
Image
Image
Image

Last screw
Image
Image
Image
Image
Image
Image

Finished shots
Image
Image
Image
Image
Image
Image
Image

Posted: 20 Jun 2016, 10:22
by cookie
This is a damn fine keyboard, I've expected nothing else from matt3o.
It seems that you haven't read the manual properly, you have put the space bar the wrong way (it's supposed to be the other way around)

Posted: 20 Jun 2016, 10:24
by Thumper
cookie wrote: This is a damn fine keyboard, I've expected nothing else from matt3o.
It seems that you haven't read the manual properly, you have put the space bar the wrong way (it's supposed to be the other way around)
You sneaky .... :D

Image

Posted: 20 Jun 2016, 10:28
by cookie
Ohhh that was intentional?

Image

:)

Posted: 20 Jun 2016, 10:28
by Wodan
Very nice build log. And a great combination of modifiers!

Posted: 20 Jun 2016, 17:45
by Ratfink
cookie wrote: Ohhh that was intentional?

Image

:)
The upside-down spacebar matches the angle of a thumb better if one rests one's hand on the desk surface, rather than several inches above.

Re: Build Log of a WhiteFox

Posted: 20 Jun 2016, 18:07
by cookie
A wooden wristrest is what you need my friend! [WINKING FACE]

Posted: 20 Jun 2016, 18:19
by Khers
Nice build Thumper! I'm not really a fan of how Cherry beige looks with bluegaloo, but the CMYW makes it really pretty. I do have one question for you though; why did you get Zealios when you were going to spring swap and lube them anyway? And your spacebar looks like an uncomfortable eyesore... :mrgreen:

Posted: 20 Jun 2016, 18:24
by DanielT
Nice keyboard :) But the spacebar is wrong :P I know there is a thing called "flipped spacebar master race" but it is wrong :)

Posted: 20 Jun 2016, 18:59
by Thumper
Khers wrote: Nice build Thumper! I'm not really a fan of how Cherry beige looks with bluegaloo, but the CMYW makes it really pretty. I do have one question for you though; why did you get Zealios when you were going to spring swap and lube them anyway? And your spacebar looks like an uncomfortable eyesore... :mrgreen:

Well, i just swapped it for ligher springs and lubed the spring. Not the switch itself :)

Other than that, if i would have lubed a linaer switch i would have still gone with zealios as they are white as costar stabilizers .. and those are used in the WhiteFox :)
DanielT wrote: Nice keyboard :) But the spacebar is wrong :P I know there is a thing called "flipped spacebar master race" but it is wrong :)
Any recommendations?

Posted: 20 Jun 2016, 19:25
by Khers
Thumper wrote: Well, i just swapped it for ligher springs and lubed the spring. Not the switch itself :)

Other than that, if i would have lubed a linaer switch i would have still gone with zealios as they are white as costar stabilizers .. and those are used in the WhiteFox :)
Sure, but if you're going to lube and spring swap, why not get Gateron clears instead? Wouldn't that be exactly the same thing? Significantly cheaper.

Posted: 20 Jun 2016, 19:37
by Mr. J
Thumper wrote: I received my WhiteFox on Saturday and couldn't be happier.
It's build with Linear Zealious R1 which are stickered and lubed.

A big shoutout to Matt3o for this project. You raised the bar on a height which is really hard to top.

WTF, where can I get something like that!? :o :o :o :P :P :P :maverick:

Posted: 21 Jun 2016, 08:40
by Thumper
Mr. J wrote:
Thumper wrote: I received my WhiteFox on Saturday and couldn't be happier.
It's build with Linear Zealious R1 which are stickered and lubed.

A big shoutout to Matt3o for this project. You raised the bar on a height which is really hard to top.

WTF, where can I get something like that!? :o :o :o :P :P :P :maverick:

This was a Drop on Massdrop last December ;)

Posted: 21 Jun 2016, 10:03
by matt3o
we might run more at the end of the year

Posted: 21 Jun 2016, 10:49
by cookie
@OP could you warp the images inside a spoiler tag please?
The thread is continuously scrolling down, it's hard to read the answers that way.

Thanks!

Posted: 21 Jun 2016, 10:50
by Thumper
cookie wrote: @OP could you warp the images inside a spoiler tag please?
The thread is continuously scrolling down, it's hard to read the answers that way.

Thanks!
Done :)

Posted: 21 Jun 2016, 17:34
by Mr. J
matt3o wrote: we might run more at the end of the year
Great news! I'm in... :)