Commodore Amiga 1000
 | |
| Branding | Amiga |
|---|---|
| Manufacturer | Mitsumi |
| Layouts | Amiga specific |
| Keyswitches | Mitsumi standard mechanical |
| Keycaps | Cylindrical dye-sub |
| Interface | Proprietary |
Contents
Keyboard
The only confirmed keyboard supplied with the Amiga 1000 was made by Mitsumi, using Mitsumi mount, tactile Mitsumi standard mechanical Type 2 switches. The caps lock switch bears an integrated LED, and the return key uses what appears to be a dummy switch of the same design as the switches found in the Monterey K7S keyboard.[1] The keycap legends are dye sublimated.
Cherry G80-0777 bears Amiga keys, but has no other Commodore or Amiga branding, and there is no evidence to suggest that it was ever supplied with an Amiga. If it was, then it appears to be very obscure.
The connector is 4P4C, specific to the Amiga 1000. The pins are 1: +5V, 2: Clock, 3: Data, 4: Ground.[2]
Variants
The following variants are listed in the specifications:
| Commodore part | Mitsumi part | Language |
|---|---|---|
| 327063-01 | R56 2144 | English (US) |
| 327063-02 | — | English (UK) |
| 327063-03 | R56 2153 | German |
| 327063-04 | R56 2152 | French |
| 327063-05 | R56 2154 | Italian |
Gallery
The example below is US English, and is dated 1987-03-26. The part number is 56-7155B, which does not match any of those found on the 1986 specification. The PCB is also marked KCT-A89YC, which is the same format as the model numbers of Mitsumi keyboards.
Keyboard top
Keyboard bottom
Key caps removed
Keyboard mechanism bottom
Keyboard mechanism top
MOS controller, dated 1386
PCB markings
Matrix schematic and specifications (1986, rev. 1987)
References
- ↑ Amiga.org — Amiga 1000 Not Booting to Workbench
- ↑ HwB — Amiga 1000 Keyboard
