deskthority

Posted: **15 Feb 2020, 19:16**

Hi,

I am a moron and I think I shorted an NTC-6252 white alps.

The board was naked and plugged in via ps2 after cleaning and I moved it to a metallic surface...

Now the keboard is not recognised in Windows and the three lights light at the same time at the moment i plug it in. Does not respond.

Dead?

Repairable?

Thanks!

Posted: **15 Feb 2020, 19:27**

shine wrote: 15 Feb 2020, 19:16 Hi,

I am a moron and I think I shorted an NTC-6252 white alps.

The board was naked and plugged in via ps2 after cleaning and I moved it to a metallic surface...

Now the keboard is not recognised in Windows and the three lights light at the same time at the moment i plug it in. Does not respond.

Dead? Repairable?

Thanks!

My NTC-6252 have same issue diagnose = dead controller

Posted: **15 Feb 2020, 19:51**

So it will become a switch donor?

Shame on me

Posted: **15 Feb 2020, 20:03**

You can always replace controler or use promicro

Posted: **15 Feb 2020, 20:07**

Take the board to an electronics repair shop, they may be able to replace a blown capacitor or something and salvage the board. If not, and you are not able to find a replacement controller - then I would say switch donor it is unfortunately.

deskthority

Dead board¿

Dead board¿

Re: Dead board¿

Re: Dead board¿

Re: Dead board¿

Re: Dead board¿