Page 1 of 1

NMB RT8755C+

Posted: 21 Feb 2017, 22:01
by elecplus
This one is not in the wiki, so I thought I would post some things here. The switches are 2-eyed black clicky switches, and the spacebar has a blue slider. Please note that the switch under the Enter key is rotated 90 degrees, as are the + and the Enter on the number pad. This is a very nice, solid feeling keyboard with a PS/2 connector. The PN is 120022-201 Rev. A; FCC ID AQ6-MAPLEZ15

Sorry the pictures are not better quality.
IMG_5893.JPG
IMG_5893.JPG (457.39 KiB) Viewed 3352 times
IMG_5895.JPG
IMG_5895.JPG (533.85 KiB) Viewed 3352 times
IMG_5896.JPG
IMG_5896.JPG (472.63 KiB) Viewed 3352 times
IMG_5897.JPG
IMG_5897.JPG (528.56 KiB) Viewed 3352 times

Posted: 21 Feb 2017, 22:10
by Engicoder
That is what I refer to as the 5th generation of the NMB/Hi-Tek 725 series keyboard (aka Space Invaders) There is also am RT-8756C+ which has a PS/2 connector.
That is the first non-branded one I have seen. Would it be for sale, perhaps?

Posted: 21 Feb 2017, 22:12
by elecplus
Sure. I have already run the caps through the sonic machine. I believe they are thick dye sub PBT?

Posted: 21 Feb 2017, 22:28
by seebart
NMB generally have dye sub PBT keycaps. Very nice indeed.

Posted: 22 Feb 2017, 00:14
by fohat
Engicoder wrote:
There is also am RT-8756C+ which has a PS/2 connector.
I had one of those. It was nice because it had a smaller footprint than most NMB. I think I sold it to romevi.

Posted: 23 Feb 2017, 04:50
by Harshmallow
I like that FCC ID too - MAPLEZ Please.

Posted: 26 Jul 2017, 11:54
by terrycherry
Thanks Sandy for the photo info.
fohat wrote:
Engicoder wrote:
There is also am RT-8756C+ which has a PS/2 connector.
I had one of those. It was nice because it had a smaller footprint than most NMB. I think I sold it to romevi.
That's great. I do not have any info about this variant of PN 120022-501 REV.F, it should have the (Clicky)Black two big eyes
Could you take a close look on the switch under the space bar and A key cap?