deskthority

I doubt he sold as many.

Is it the n-key rollover version?

7bit wrote:I doubt he sold as many.

Is it the n-key rollover version?

I also doubt he sold that many; I don't know why he won't come down more with so much in stock -_-

I don't know if it is n-key rollover. Here is his description:

"Full Size 120 Keys, PS/2, 48 Relegendable, 59 Programmable 1 & 2 Track MSR, Black. 18” Cherry MX keys with Gold Crosspoint contacts. Programmable keys. 48 inscribable key caps. Expanded layout (120/121 keys). Programmable magnetic stripe reader."

Well, the keyboards are new and cost more than 200 EUR (lasered, grey case and 100% not n-key rollover!).

The seller should open one box and pull one of the key caps and take a a close-up picture of from above, so a diode would be visible.

If n-key rollover then the price is more than OK, else confront the seller with the fact it is not even n-key rollover, so the board is worth nothing!


PS: Key caps and switches are more expensive if purchased separately in my group buys.

>>>PS: Key caps and switches are more expensive if purchased separately in my group buys.

Yes but import taxes and shipping overseas are a bitch!!!

Half-Saint wrote:>>>PS: Key caps and switches are more expensive if purchased separately in my group buys.

Yes but import taxes and shipping overseas are a bitch!!!

Must you rip me out of my dream?

Half-Saint wrote:>>>PS: Key caps and switches are more expensive if purchased separately in my group buys.

Yes but import taxes and shipping overseas are a bitch!!!

Well I guess I could pull the caps/switches but the price would still be too much right?

I asked him to pull a cap on the G80-8200HPDUS-2 just to see what switches it is.

Reptile wrote:

Half-Saint wrote:>>>PS: Key caps and switches are more expensive if purchased separately in my group buys.

Yes but import taxes and shipping overseas are a bitch!!!

Well I guess I could pull the caps/switches but the price would still be too much right?

I asked him to pull a cap on the G80-8200HPDUS-2 just to see what switches it is.

I want the complete board!

oooo is it blue?

PS/2 versions are NKRO, most USB one is 6KRO, but some more recent ones seem to only be 2KRO as they have no diode is what I have seen in my expireince with these. Generally they seem to come with browns, but sometimes clears. They are nice board.

dirge wrote:oooo is it blue?

Browns

Reptile wrote:His lowest price would $78 per board.

Was that BEFORE shipping to you? I remember when he was selling these to people for $100 + shipping. I was NOT one of those people.

And the description is misleading. This isn't a "Full ISO doubleshot set". Only the "Enter" and "\|" are ISO.

Reptile wrote:The G80-8113's we got before were made in the same year. I haven't even tried any of the Cherry tools software yet; I should probably do that

I just asked for a quote on 10 boards just to get a ballpark price. He has 40+ available; I doubt there will be any issue of him selling them all.

Cherry Tools has worked fine thus far on my 8113 (thanks again!) except that the media play/pause key doesn't seem to do anything with my media play of choice (boom).

Cutting the paper and labeling the keycaps took a little time, though. Mine does not appear to have diodes, however. (It fails ASW)


If these have clear, I'd possibly want one.

The_Ed wrote:

Reptile wrote:His lowest price would $78 per board.

Was that BEFORE shipping to you? I remember when he was selling these to people for $100 + shipping. I was NOT one of those people.

And the description is misleading. This isn't a "Full ISO doubleshot set". Only the "Enter" and "\|" are ISO.

Nope $78 a piece to my door. Sorry I meant more of a "full set" because a moogle wouldn't be needed.

dorkvader wrote:

Reptile wrote:The G80-8113's we got before were made in the same year. I haven't even tried any of the Cherry tools software yet; I should probably do that

I just asked for a quote on 10 boards just to get a ballpark price. He has 40+ available; I doubt there will be any issue of him selling them all.

Cherry Tools has worked fine thus far on my 8113 (thanks again!) except that the media play/pause key doesn't seem to do anything with my media play of choice (boom).

Cutting the paper and labeling the keycaps took a little time, though. Mine does not appear to have diodes, however. (It fails ASW)


If these have clear, I'd possibly want one.

I am glad all the software works well. I honestly opened my 8113 to take pictures for the group buy and haven't touched it since lol. My white ninja linear r comes today and I think it will look good with those keys.