deskthority

Phil_Goodman there should be no issues, regardless of how much it is used. If there is any issue, following the manual fully will result in a complete fix. As a last resort I can help, if you are willing to lose using the board for a month or so (shipping back and forth and QC time) but all I would ...

That is something to consider but there are still VAT / other import taxes for Europe regarding goods sent from outside Europe. Since the goods are all made in China, my understanding is that they would be subject to the same duty, not any increased or reduced duty for made in US goods.

I am hoping ...

Please fill out the Google form linked below to reserve or request one of the possible new Model F designs (Split Ortho, Planck, Preonic, 6x12, F20, Kinesis Advantage, Unsaver, etc.). All of these designs may not be made, so in the Google form, please do feel free to request second choices and third ...

As noted in the manual, intermittent issues are sometimes due to dust or debris inside the keyboard, if replacing the springs and correctly reinstalling them does not fix the issue. The quickest way to fix this issue permanently would be to remove the keys and replace the springs and flippers with ...

Tariff update: as an update, the 8471 code (covering keyboards and other items) appears to have been temporarily exempted from the vast majority of the tariffs per the below update; currently this category remains subject to the 20% level, but not the 145% level: https://content.govdelivery.com ...

As I mentioned in the manual, the last step is to email me to discuss any issues that could not be resolved. The manual does not say that everything can be resolved without my help, but just that I am the last resort to get the keyboard set up and running.

The manual notes that you should discuss ...

My guess is that your spacebar wire needs to be bent even more, so much so that there is a 1mm or so gap for each of the 2 metal tabs between those tabs and the spacebar wire. I did not see a response indicating whether that was tried; my reading of your follow up reply indicates that you did not ...

I recommend reviewing the manual from beginning to end, as this specific issue of constantly pressed keys is addressed there. Everyone's first step should be reviewing the manual instead of posting about these kinds of errors as I feel that every error can be addressed by following all the steps in ...

Very nice! I recommend adding links for each of your keyboard pages onto the timeline, so folks can directly click each timeline post to go see more details on your site about each featured keyboard. I see them for some timeline elements.

I have added it to that page as requested!

With permission I am posting a great review and photos of the classic style F104 keyboard from last month:

"First of all, I cannot thank you enough for the time and effort you’ve put into designing and developing the Classic Style Model F keyboards. It’s truly a blessing for IBM and keyboard ...

My personal expectation is that the tariffs will not be a problem by the time these keyboards are ready to ship later this year, so no one will be paying tariffs, since that time is several months away. The keyboards are not ready to ship, so no one should be worrying right now about months into the ...

"Since there are no spare springs included, I could not replace them. That's the only suggestion I have not yet tried."

This is not accurate - the manual notes you can definitely switch out springs with other working springs to see if the issue is due to the spring itself, but I agree that not ...

OreoCookie I recommend reading through the written manual from beginning to end, not just the hour-long setup video, as there are many recommended steps not that are not all shown in the video.

You may need to remove and re-seat or replace the shift and spacebar springs.

If the space bar gets ...

Yes, the troubleshooting steps are in the recently updated manual. Replacing the springs is one of the steps. Sometimes removing the keys and moving around the flippers by hand or with tweezers helps to dislodge some debris underneath the flipper that may have caused odd issues. A couple times I've ...

All the zinc case boards use the same uncoated old style powdercoating. The textures vary with each keyboard but they are the same paint formulations; just the bumps are different.

Yes, as I mentioned over email, it is expected that the uncoated original style paint will wear where it is rubbed during contact. To keep the project's goal as a reproduction of the IBM originals, the paint has no glossy automotive style protective finish.

Several years ago I changed the paint ...

Nothing just yet in terms of a new update. The factory is still working on those remaining parts (module assembly, case parts and top and bottom inner assembly plates) noted with last month's update; they are expected to take several months in total to complete. The expectation is still for these ...

Yes, please see a few posts up for updates on the F122, and see the beam spring project thread for the latest updates on the Round 2 beam spring project. Those posts are the latest updates. Were you looking for an update on another part of the project? Please let me know.

Please note that the ...

Interesting - please share photos! I guess you wanted to reduce a ringing sound?

Thanks for your feedback tswilson! Glad everything is up and running. Various sound mods have been gathered in the manual on the project web site appendix section. If anyone knows of any other recommended mods, please link to them or let us know!

That is not at all an accurate characterization of the required installation and setup process noted in the manual. A complete disassembly and inspection of hundreds of parts is not at all recommended or required.

The project philosophy has been quite clear over the past 5+ years, that the end ...

califool as we discussed over email, my apologies that USPS destroyed your packaging. Were you going to get back to me over email so I can replace for free any broken parts of your keyboard?

I can see by your post that you are trying to diagnose it yourself instead of following the manual fully ...

It should take you under an hour to review the manual on the project web site to get an understanding of these great old style keyboards.

The flipper contacts the PCB (which sends the key signal to the computer) when no spring is installed, so what you describe is the expected behavior.

The manual ...

A few folks periodically ask about making their Model F or Beam Spring keyboard wireless.

Has anyone tested with Model F or beam spring keyboards any products that make USB keyboards wireless?

Here's one I recently came across: https://handheldsci.com/kb/

F122 production and assembly update:

The first half of the F122 keyboard batch has arrived and is now in stock!

Feel free to email me if your F122 shipping address has changed but please first do an email search for your F122 order confirmation email to confirm whether that shipping address is ...

Hi ngnx - the pictured set is one and the same set that was ordered a few years ago for the Round 1 beam spring boards. It is the only set that has ever been offered as part of the production boards. The key set includes all the pictured keys except the transparent relegendables as ritter has ...

A great read about the Gorton font jmaynard! Thanks for sharing it.

Does anyone know the font that IBM used on their F122 keyboard labels?

The factory reports that they completed another 20,000 modules in the past few weeks, bringing the total to 100,000 out of the ~150,000 for the current ...

Rico this is great news! The eventual goal is to have all new and original Model F keyboards supported by the Leyden Jar controller.

If anyone has any ideas to discuss about regarding the next keyboards (ortholinear / planck / split ortho / etc.) please do share them! What would be feasible to add ...

Yes, everyone feel free to sign the interest forms below:

Pad print interest form: https://forms.gle/qvX4pR27a9Sr7fSN6

Interest form for PC AT big enter, ISO enter non-stepped, and Code key: https://forms.gle/XNmsgnwKfbwYMfci8

As a reminder, I had to cancel factory work on both these items in the ...