Page 1 of 5
Guess The Project
Posted: 07 Jan 2013, 10:13
by Mrinterface
2013.
A new year filled with opportunities
Guess The Project : I'll post pics/videos of computer interface related things I am working on, and I invite you to guess what the projects are
Project 1 :
- Guess The Project 1.png (38.03 KiB) Viewed 7496 times
Posted: 07 Jan 2013, 10:31
by kbdfr
Looks like it could be an adapter for using Cherry compatible keycaps on Alps switches.
If so, excellent idea
Posted: 07 Jan 2013, 10:39
by Kurk
kbdfr wrote:Looks like it could be an adapter for using Cherry compatible keycaps on Alps switches.
If so, excellent idea
Exactly what I thought. While we're at it: does something like a MX-stem-to-IBM-M-caps adapter exist?
Posted: 07 Jan 2013, 14:27
by phetto
wow.. Now I really need to step up with the alps keyboard project..
Posted: 08 Jan 2013, 18:53
by Mrinterface
Guess The Project.
Number 2
- Project 2.png (235.2 KiB) Viewed 7418 times
Posted: 08 Jan 2013, 19:09
by damorgue
A table/chart. Yes I am genious, you may all praise me later.
Compatibility table of some sort perhaps?
Posted: 08 Jan 2013, 19:17
by Mrinterface
damorgue wrote:A table/chart. Yes I am genious, you may all praise me later.
Compatibility table of some sort perhaps?
Hint : It's a floorplan.....
Posted: 08 Jan 2013, 19:18
by HzFaq
Switch try basement?
Posted: 08 Jan 2013, 19:24
by Mrinterface
HzFaq wrote:Switch try basement?
Close....
Hint 2 : It's going to be publicly accessible.
Posted: 08 Jan 2013, 19:43
by Ascaii
MrInterfaces little shop of horrors...err, I mean keyboards?
Are you turning your garage into a keyboard museum?
Posted: 08 Jan 2013, 19:46
by 7bit
Mrinterface wrote:Guess The Project. --- Number 2
Easy!
This is the new keyboard monopoly!
Posted: 08 Jan 2013, 19:58
by Mrinterface
7bit wrote:Mrinterface wrote:Guess The Project. --- Number 2
Easy!
This is the new keyboard monopoly!
Actually....
That is a very cool suggestion!
Posted: 08 Jan 2013, 20:01
by 7bit
It starts with used Cherry G80-3000 with lasered keycaps and ends with a NIB Space cadet keyboard.
Instead of houses you add keycaps.
Posted: 08 Jan 2013, 20:03
by fossala
7bit wrote:It starts with used Cherry G80-3000 with lasered keycaps and ends with a NIB Space cadet keyboard.
Instead of houses you add keycaps.
It would cause so many arguments. For instance anything cherry should be nice and cheap.
Posted: 08 Jan 2013, 20:14
by tlt
There has only been eight days on this year yet and project 1 looks like it's already half finished. Send it to Shapeways and show us a keyboard with really tall keys!
Posted: 08 Jan 2013, 20:36
by Mrinterface
tlt wrote:There has only been eight days on this year yet and project 1 looks like it's already half finished. Send it to Shapeways and show us a keyboard with really tall keys!
Actually.... I have access to a 3D printer.
It turned out the current design can't be printed due to 'overhang' . I am trying to get freeCad to do as I want, I only want to move an edge @#$&(@#$!@*()@$.
Posted: 08 Jan 2013, 20:46
by tlt
I don't think overhang is a problem i Shapeways process.
Posted: 08 Jan 2013, 20:47
by damorgue
Mrinterface wrote:tlt wrote:There has only been eight days on this year yet and project 1 looks like it's already half finished. Send it to Shapeways and show us a keyboard with really tall keys!
Actually.... I have access to a 3D printer.
It turned out the current design can't be printed due to 'overhang' . I am trying to get freeCad to do as I want, I only want to move an edge @#$&(@#$!@*()@$.
I'll gladly help you if you want.
Posted: 08 Jan 2013, 21:05
by Mrinterface
damorgue wrote:Mrinterface wrote:tlt wrote:There has only been eight days on this year yet and project 1 looks like it's already half finished. Send it to Shapeways and show us a keyboard with really tall keys!
Actually.... I have access to a 3D printer.
It turned out the current design can't be printed due to 'overhang' . I am trying to get freeCad to do as I want, I only want to move an edge @#$&(@#$!@*()@$.
I'll gladly help you if you want.
PM-ed....
Posted: 10 Jan 2013, 13:53
by Mrinterface
Project 3.
- Look Mom, no Fingers!
- project3.png (1.03 MiB) Viewed 7290 times
Posted: 10 Jan 2013, 14:19
by CeeSA
what a beautiful ring
What is that black keyboard? It's not a rubberdome - or?
Posted: 10 Jan 2013, 14:29
by Findecanor
I see four fingers, and a digit over on that grey Matias board.
Posted: 10 Jan 2013, 14:42
by Mrinterface
CeeSA wrote:what a beautiful ring
What is that black keyboard? It's not a rubberdome - or?
That, my friend, is a genuine black PC Matias Quiet Pro. Testing it for gaming
Posted: 10 Jan 2013, 14:48
by Mrinterface
Btw : that mouse in project 3 is NOT touching that most excellent mousepad
Posted: 10 Jan 2013, 15:35
by Mrinterface
tlt wrote:I don't think overhang is a problem i Shapeways process.
I'll print it coming friday on an Orca
Posted: 10 Jan 2013, 16:43
by vun
Is that some sort of contraption that lets you lift the mouse by simply raising your hand, rather than having to grip it with the fingers and lift it up? If so that's a brilliant idea, because that annoys me with some mice where there isn't really anywhere for my fingers to get a proper grip for lifting the mouse.
Posted: 10 Jan 2013, 16:53
by Mrinterface
vun wrote:Is that some sort of contraption that lets you lift the mouse by simply raising your hand, rather than having to grip it with the fingers and lift it up? If so that's a brilliant idea, because that annoys me with some mice where there isn't really anywhere for my fingers to get a proper grip for lifting the mouse.
Spot on
Posted: 11 Jan 2013, 18:02
by Mrinterface
Project 1
Proto
http://youtu.be/wWRvl_BJLlw
Why don't the YouTube tags work?
- Project1_proto1.png (1.15 MiB) Viewed 7218 times
Posted: 11 Jan 2013, 21:13
by tlt
Have you tried them? Do they fit?
Posted: 11 Jan 2013, 22:41
by Mrinterface
tlt wrote:Have you tried them? Do they fit?
This weekend.... Fit time