- Tray removal courtesy of hacksaw...
- rollermousehacksaw.png (72.61 KiB) Viewed 3344 times
[Project] RollerMouse to RollerMouse Free
-
Input Nirvana
- Location: San Francisco bay area, California, USA
- Main keyboard: Kinesis Advantage
- Main mouse: Rollermouse Free2
- DT Pro Member: -
You still working on the project?
Any more pics?
Any more pics?
-
ben
- Main keyboard: Realforce SE1200
- Main mouse: CST2545W-RC
- Favorite switch: Cherry MX Brown
- DT Pro Member: -
Sanding took a few nights, but I'm fairly happy with how it turned out.
Unfortunately, at 20" long, it's a bit unwieldy next to my tenkeyless.
I may try chopping the buttons out to shorten the whole thing, but I wouldn't attempt it without a dremel.
-b
Unfortunately, at 20" long, it's a bit unwieldy next to my tenkeyless.
I may try chopping the buttons out to shorten the whole thing, but I wouldn't attempt it without a dremel.
-b
-
Input Nirvana
- Location: San Francisco bay area, California, USA
- Main keyboard: Kinesis Advantage
- Main mouse: Rollermouse Free2
- DT Pro Member: -
NEAT! I'm shortening a Rollermouse to about 10", the shortest you can make it and still retain native functionality.
-
Input Nirvana
- Location: San Francisco bay area, California, USA
- Main keyboard: Kinesis Advantage
- Main mouse: Rollermouse Free2
- DT Pro Member: -
One of the things I'm doing is cutting away several inches of the cover on the right side to expose more of the actual rollerbar. Ultimately I want to see if I can build it into my modded keyboard.
-
CephalicCarnage
- Main mouse: Razer Copperhead - First Edition (2005)
- Favorite switch: Cherry MX Brown
- DT Pro Member: -
Good job!
I wonder what I can hacksaw around here....
I wonder what I can hacksaw around here....