IBM Model F
-
CarpCharacin
- Location: SLC UT
- DT Pro Member: -
I'm looking to buy an IBM Model F with any layout, ideally under $100.
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
Check out my thread here: viewtopic.php?f=55&t=21975&p=446059#p446059
-
CarpCharacin
- Location: SLC UT
- DT Pro Member: -
I'm looking for a full keyboard, not just the chassis.Redmaus wrote: 15 Jun 2019, 05:52 Check out my thread here: viewtopic.php?f=55&t=21975&p=446059#p446059
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
I full XT keyboards and cases as well.
-
CarpCharacin
- Location: SLC UT
- DT Pro Member: -
How much for a full XT keyboard?
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
$150 with a NOS assembly in a used case
-
CarpCharacin
- Location: SLC UT
- DT Pro Member: -
I'm looking for something that's under $100 in total.
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
That could definitely done with what I have, but the condition would not be new old stock.
-
CarpCharacin
- Location: SLC UT
- DT Pro Member: -
I'm not specifically looking for NOS. What would the condition be?Redmaus wrote: 16 Jun 2019, 05:48That could definitely done with what I have, but the condition would not be new old stock.
-
Redmaus
- Gotta start somewhere
- Location: Near Dallas, Texas
- Main keyboard: Unsaver | 3276 | Kingsaver
- Main mouse: Kensington Slimblade
- Favorite switch: Capacitative Buckling Spring
- DT Pro Member: -
- Contact:
I have some in decent condition, others in a far worse condition. I'd sell you a decent condition one for $60. I'd sell it for less but if I sell a case with a used chassis then thats one less NOS chassis I can sell with a case included.CarpCharacin wrote: 16 Jun 2019, 06:44 I'm not specifically looking for NOS. What would the condition be?
If you want a crappy one that has rusted plate and whatnot, I'd sell it for $35. This could be a restoration project if you'd enjoy that.
EDIT: to clarify, both choices would come with all the keycaps.