deskthority

Thanks to fellow member 'arakula', there's now a Windows GUI that renders configuration of the universal Bluetooth-USB-Hybrid Model M controller (Blusb, in short) intuitive and convenient. All revisions that have an M122 cut-out in the middle of the PCB and a 20x8 matrix should be compatible. Please report back to me if you hit a snag somewhere or would like to enquire about compatibility issues regarding your particular revision of the design.

Here's the GitHub link: https://github.com/Arakula/blusb_gui

Note: While the GUI has already reached a remarkable state of maturity and will most likely work just fine, it also might just not work at all on your rig, for all kinds of reasons. Please give it a go and report back your findings either on GitHub or on Deskthority. I appreciate it!

So far there's only a Windows release, but support for other operating systems will be added in the near future thanks to the efforts of fellow members 'marcvk' and 'quintus'.

Ports to Linux and Mac of the original CLI I wrote to change settings and key mappings are now also in the works:

Windows

https://github.com/chancefavorstheprepa ... sb_cli_win

Mac OS

https://github.com/quintusl/mblusb

Linux

https://github.com/marcvk/blusb

Feel free to check it out and chime in, if you like.

reserved

Hi,

There is another repository with a functioning command line / terminal version of the blusb program. It's developed on Linux, but should also work on Windows / MacOS.

See https://github.com/marcvk/blusb

One thing that is missing is UI support for editing macros. If there is enough demand I can also add that.

Cheers,
Marc

thanks Marc, sorry I was so slow to react!