WTB: Novatouch 6u spacebar housings&sliders + 2x2u sliders,variable weight topre domes

[AdrianMan]

1.So I want to replace the 6u spacebar with a MX one from a Novatouch.

2.Also in need of 2x 2u Novatouch sliders.

3. I would like to try a variable weight dome from a topre keyboard, should be compatible with my FC660c

Thanks !

[AdrianMan]

Found some sliders, now .... anyone could help with the 6u spacebar MX sliders & housings from a novatouch ?

Thanks !

[phinix]

Hey Andrian, it's actually 6.25u for spacebar.

[Muirium]

Yup. They’re identical to the standard MX layout you’ll find on Filco etc. 1.25u mods and 6.25u spacebar. For maximum caps compatibility.

[Laser]

He doesn't want to put a spacebar on the Novatouch, he wants to put it on a converted Topre kebyoard. So it's 6u. It doesn't actually matter, what he wants are two pieces from the Novatouch that can be placed (probably) in a Topre keyboard to stabilize the spacebar. So, it's about the two cruciform sliders & housings stabilizing the spacebar, below:

[AdrianMan]

Thanks a lot Lazer ! You are right ! I'm searching for the housings + plungers that stabilize the spacebar. I can use the 6u wire from the topre keyboard that I want to convert

These guys over here:

[AdrianMan]

I allready did that mod on a FC660c.

Basically you put the mx top housing + plunger in the topre board, if you look at the picture I shared earlier, you can swap the spacebar housings between them and use the 6u wire from the topre keyboard

[AdrianMan]

I'd also like to try a variable weight dome sheet, anyone is willing to let his/hers go?

[kybernator]

Hi, for the stabilizers you want to use/build, would cherry parts be of any help?

I would be happy to give you some from the PCBs here

viewtopic.php?f=55&t=20890

for free, if you can use them.

[AdrianMan]

Hi, for the stabilizers you want to use/build, would cherry parts be of any help?

I would be happy to give you some from the PCBs here

viewtopic.php?f=55&t=20890

for free, if you can use them.

Thanks a lot for the offer, I found a mod that used costar/cherry stabilizers but in plate mount and ordered some 6u's from AliExpress to try out the mod and experiment.

I'll keep your offer in mind, you are very kind !