Reversible internal hasu's converter for pingmaster
Posted: 24 Aug 2018, 22:47
When making a converter for my IBM 6113442, I found that a floppy disk power connector (http://a.co/d/hdBjkiX) fits nicely on the internal header.
Pins are:
1 - Yellow - Clock (to teensy PD1)
2 - Black - Data (to teensy PD0)
3 - Black - Ground
4 - Red - +5V
Nothing fancy, but I hope it helps someone else.
Pins are:
1 - Yellow - Clock (to teensy PD1)
2 - Black - Data (to teensy PD0)
3 - Black - Ground
4 - Red - +5V
Nothing fancy, but I hope it helps someone else.