deskthority

Are the Commodore key caps usable on anything other than the breadbox? I have some spares that came with a bunch of Commodore stuff I recently scored

you need adapters, someone here posted a 3d files I believe... OOOR you could wait for the rerun of the SA Retro set

I did notice the similarity between MX mounts and these, but way bigger than MX. Thanks for the info on the spacers!

twinrotor wrote: I did notice the similarity between MX mounts and these, but way bigger than MX. Thanks for the info on the spacers!

If MX is smaller just use something like cloth to make it fit, not really hard at all.

PlacaFromHell wrote:

twinrotor wrote: I did notice the similarity between MX mounts and these, but way bigger than MX. Thanks for the info on the spacers!

If MX is smaller just use something like cloth to make it fit, not really hard at all.

the stems have to fit inside the housing on mx switches. this is impossible with old caps like this. you need to create an adapter to be able to use these.

Oh, now I understand. Maybe with a dremel but keycaps may turn weak

PlacaFromHell wrote: Oh, now I understand. Maybe with a dremel but keycaps may turn weak

yeah I think that would do more harm than good

There was a time that you could order adapters on Shapeways. I did back in 2013, and I can only describe the result as interesting but completely impractical. There's still a page up on Shapeways for the adapters but they're no longer for sale. Relevant thread: workshop-f7/mec64-keyboard-t4522-60.html

I’m on mobile st the moment but I made and printed a file for these a short while ago. OP if you drop me a PM when I’m home I can send you the file


Sent from my iPhone using Tapatalk

GordonZed wrote: I can only describe the result as interesting but completely impractical.

What exactly makes them impractical? I'm assuming its the cap height but I could be mistaken.

Do they fit on SKCC stems? I've been looking for an SKCC set for an upcoming build.

ScottPaladin wrote: Do they fit on SKCC stems? I've been looking for an SKCC set for an upcoming build.

I tried in the past and I think the answer is no, but it's been a couple of years so I'm not positive about that. I have a set at home that I'll sell you if so. I do have SKCC compatible Cyrillic that I might be willing to part with if they aren't compatible though.

Blaise170 wrote: I tried in the past and I think the answer is no, but it's been a couple of years so I'm not positive about that. I have a set at home that I'll sell you if so. I do have SKCC compatible Cyrillic that I might be willing to part with if they aren't compatible though.

I wouldn't be surprised if they're close but not quite.The stems look a lot like those off the Archer/Realistic board I got the other day. (Edit: looked back at my photos and I realized that's not true) Those caps fit the SKCC switches, but the geometry forces them to swivel 10 degrees to right or left. Looks bloody awful. I tried shimming with tape, but to no avail.

ScottPaladin wrote: Do they fit on SKCC stems? I've been looking for an SKCC set for an upcoming build.

Don't get me started on SKCC stems. I have a ton of Mitsumi caps off various typewriters and they totally look like they should fit, and totally do fit, but they all sit slightly cock-eyed on skcc stems. Makes no sense.

SpacemanToby wrote: Don't get me started on SKCC stems. I have a ton of Mitsumi caps off various typewriters and they totally look like they should fit, and totally do fit, but they all sit slightly cock-eyed on skcc stems. Makes no sense.

Haha, I know your pain. I bought a lot of two Archer/Realistic with something like Mitsumis hoping they'd fit and got the exact same result.

Lots of great info guys, thanks.

I did notice they looked like a SKCC stem, but wasn't sure. All I have to compare them with are MX style. There is a possibility I'll have these, plus another keyboard. If they are not useful to anyone but C64 users, I'll just pass them on to those guys