Page 1 of 1
/[WTT] SMK inverse cross keycaps, switches, Canon AP 6300 typewriter
Posted: 29 Oct 2017, 16:22
by mhinsch
In my quest to find the perfect set of vintage ALPS keycaps for my diy I've ebayed a Canon AP 6300 typewriter (hoping it might have ALPS keycaps). As it turns out, though, it's SMK switches with inverse cross mount. I'm offering one or several out of:
- * a set of nice doubleshot SMK keycaps
* 6 SMK white switches (with LED)
* the entire typewriter (collection only)
I didn't pay much for the typewriter myself so I would be happy to give each of these away for either a couple of pounds + shipping or (preferred) some nice vintage ALPS key caps. I'm not even necessarily looking for a full set, so if you have something nice, just PM me and I'll see whether I'm happy with it.

- IMAG0763.jpg (2.57 MiB) Viewed 5766 times

- IMAG0764.jpg (2.28 MiB) Viewed 5766 times

- IMAG0765.jpg (2.59 MiB) Viewed 5766 times

- IMAG0766_1.jpg (655.32 KiB) Viewed 5766 times
EDIT
terminology
EDIT 2
just to clarify - there are only 6 mechanical switches in this keyboard, all keys without LED sit on rubber domes (blue slider in the picture).
Posted: 29 Oct 2017, 17:25
by seebart
Interesting, what are you looking for?
Posted: 29 Oct 2017, 19:50
by mhinsch
So, I'm about to build my first keyboard. I'm aiming for something 60%ish + navigation (+ whatever odds and ends I feel like adding). So far I have one set from an Atari 800xl and one from a Tandy 102. Both are really nice but miss a couple of keys (e.g. cursors for the Tandy) to make a complete set that's suitable for my purposes.
Thus - to cut a long story slightly shorter - what I'm looking for are either keys (e.g. a set of cursors + PgUp + PgDwn + etc.) that I could add to my existing sets to make them "complete" (problem here is of course profile and key shape...) or a full set that I could use as is. Some MSXs for example have beautiful more or less complete sets (I'm trying to hunt down a Toshiba HX10, but they tend to go for more money than I am willing to invest).
Hope that makes sense.
Posted: 29 Oct 2017, 20:01
by seebart
Sure that makes sense. Sorry I don't have any of those keysets. I have this slightly incomplete Alps SKCC set that I might sell/trade:
wiki/Tatung_71739
Posted: 29 Oct 2017, 20:02
by mhinsch
Sorry no, that won't work, I'm looking for standard Alps mount.
(beautiful key caps, though)
Posted: 29 Oct 2017, 20:12
by seebart
mhinsch wrote: Sorry no, that won't work, I'm looking for standard Alps mount.
(beautiful key caps, though)
Right, of course there is no "standard Alps mount". I sure you mean:
wiki/Alps_SKCL/SKCM_series.
Posted: 29 Oct 2017, 20:17
by mhinsch
Well, standard as in most common (AFAIK), but yes, that's the one I meant.
Posted: 30 Oct 2017, 02:38
by ideus
seebart wrote: Sure that makes sense. Sorry I don't have any of those keysets. I have this slightly incomplete Alps SKCC set that I might sell/trade:
wiki/Tatung_71739
Is that set MX compatible?
Posted: 30 Oct 2017, 11:27
by mhinsch
ideus wrote: seebart wrote: Sure that makes sense. Sorry I don't have any of those keysets. I have this slightly incomplete Alps SKCC set that I might sell/trade:
wiki/Tatung_71739
Is that set MX compatible?
http://telcontar.net/KBK/keycapcomp.php
Posted: 30 Oct 2017, 14:12
by seebart
ideus wrote: seebart wrote: Sure that makes sense. Sorry I don't have any of those keysets. I have this slightly incomplete Alps SKCC set that I might sell/trade:
wiki/Tatung_71739
Is that set MX compatible?
Nope.
Posted: 04 Nov 2017, 11:14
by mhinsch
bump
Posted: 29 Nov 2017, 15:20
by mhinsch
bump
Posted: 08 Dec 2018, 18:00
by mhinsch
bump
Re: /[WTT] SMK inverse cross keycaps, switches, Canon AP 6300 typewriter
Posted: 07 May 2020, 01:43
by mhinsch
It's been a while, let's give this another try.
Re: /[WTT] SMK inverse cross keycaps, switches, Canon AP 6300 typewriter
Posted: 07 May 2020, 04:10
by kelvinhall05
pming