Tl;dr:
Group Buy for a full brushed stainless steel 60% plate and bent steel case. Order form below:
https://docs.google.com/forms/d/1zvg827 ... pXgR0IQZg/
WHAT:
I'm doing a group buy for a universal 60% plate being cut in 16 gauge stainless steel. The GB will have very reasonable prices and be open for 7 days, with delivery taking place prior to the end of the year. I’m only opening this to US-based orders at this time; I unfortunately don’t have enough time to handle international shipping procedures right now, and I apologize to anyone who thinks this is unfair.
Here is an album with images of the parts that will be cut
Here’s a very simple render of the assembled parts.
You will receive:
- 1x - Universal-layout MX-switch supporting 60% brushed steel switchplate
1x - Bottom 60% brushed bent steel case
1x - set of 6 12mm brass standoffs with M3 screws
The price will start at $52 with 2 day USPS Priority shipping. I know the original IC was for a sandwich-style board, but that type would be more expensive and far more prone to issues with my producer. Since the whole point is just to have a cheap metal fully-enclosed 60% board, I decided to go with a case type that is essentially identical to the bent cases for my 40% boards, just on a larger scale.
The price will scale down as MOQs are reached (shipping included in all prices):
- 15x - $52 per order
25x - $47
35x - $42
50x - $35
You will receive emails from my personal account, and any email requiring a response will receive one within 24 hours. I am opening the GB and will allow it to continue for 7 days. I will then confirm and send out invoices in the following 3 days.
I expect the parts to come in within 21 days of the order placement date. I should have the parts and will prepare them for shipping in the 3 days following the order fulfillment, with everyone receiving tracking info to their Paypal email.
This means that if everything goes to plan, this group buy will deliver your order in your hands by December 21st 2016.
Any questions, please ask!
