deskthority

Posted: **10 Jun 2015, 19:33**

: alka_3.jpeg (301.19 KiB) Viewed 1513 times

There is really nothing remarkable about this keyboard from the early to mid 90s. However, the brand attracted my attention since I've never heard of it. I thought it must be a brand/re-brand of some known OEM, but it turns out that Alka's Industrial Co Ltd from Hong Kong was manufacturing their own keyboards. FCC ID check:

(granted 10/13/1993)
Alka's Industrial Co Ltd
Flat A-C, 21/F, Gold King Ind Bldg 35-41 Tai Lin Pai Road
Kwai Chung, N.T.,
Hong Kong

: alka_2.jpeg (264.86 KiB) Viewed 1513 times

AK-68 on the board:

: alka_8.jpeg (439.58 KiB) Viewed 1513 times

It seems that getting the FCC approval was a big deal to Alka:

: alka_1.jpeg (478.26 KiB) Viewed 1513 times

Holtek controller and DIN5 connector:

: alka_9.jpeg (609.98 KiB) Viewed 1513 times

: alka_10.jpeg (358.08 KiB) Viewed 1506 times

ATW Alps clones and keycaps:

: alka_5.jpeg (283.94 KiB) Viewed 1506 times

: alka_4.jpeg (526.94 KiB) Viewed 1506 times

: alka_6.jpeg (517.82 KiB) Viewed 1506 times

: alka_7.jpeg (422.17 KiB) Viewed 1506 times

In short, a very mediocre KB:

Strong points
- possibly very affordable at the time

Neutral:
- decent-looking keycaps

Weaknesses:
- poor craftsmanship and choice of materials -- both the torque/twist and press flex is very prominent; keys noticeably not aligned properly (just look at the F row)
- ATW Alps clone (http://deskthority.net/wiki/ATW_Alps_clone) really no match for the genuine Alps

NOTE: AT/XT switch is under the right leg (not shown)
NOTE 2: put it on wiki: http://deskthority.net/wiki/Delta_AK-68

Posted: **10 Jun 2015, 20:54**

Nice. Clean Alps clone board. Boxed too. Never heard of the brand.

deskthority

Delta AK-68 (Alka's Delta AK-68 w/ATW clones)

Delta AK-68 (Alka's Delta AK-68 w/ATW clones)

Re: Delta AK-68 (Alka's Delta AK-68 w/ATW clones)