deskthority

The gray used with the CADET sets, referred to as SPH gray, is color code GD. The gray used with the Honeywell sets is color code GPA. They are very similar (almost indistinguishable under many lighting conditions), but they are technically different shades of gray.

It is also worth mentioning that the shade of white used for the legends is different on the SPH gray and BLUE keycaps than that used on the Honeywell keycaps.

Norman_ wrote: With a deadline looming so close (apparently) this wouldn't be a good time to have to change around packs and rows. I'm buying for a custom layout, and i would be seriously pissed if some of those kits changed to R4 and half stayed at R3.

Just change the shifts, for now

Edit: Also, why are the shift175 all row 3? Apparently, SP has had 1.75u R4 molds for a while

Yes what about row 4 shift175? Also wondering about the cursor kits now, with the R3 "up" keys. If the right shift is going to be R4, then can we get cursor kits with R4 "up" keys? There are arrow keys available in this configuration, but not "up" "down" "left" right" key kits in this configuration. On 75% boards the right shift is adjacent to the "up" key, so they would need to be the same profile.

We did not have 1.25, 2.25 and 2.75 in row 4, so the decision was to leave all other SHIFT keys in row 3, because it would look funny if you had a 1.25 or 2.25 units SHIFT at the left in row 3 and the 1.75 units in row 4 on the right.


Now, this is no longer the case.


We are not talking about the bottom row to get row 4 profile. This would be stupid.


What I will do, is changing all SHIFTs in all kits to row 4 but add row 3 SHIFTs
for those who want them to stay in row 3.


Having the main typing area in their proper rows and the modfiers all in row 3 is not a too bad idea. This was the route we went with Round 4.

Does that means that the HONEYB/SHIFT175/BLACK I ordered to complete my board will end up having a different row ?

If I want to replace all my shifts with row 4 ones can I buy them separately ?

Yes, but you can order the HONEYB/SHIFT175R3/BLACK !


I will update the wiki within a few days!

There are up to 5 more keys possible for this kit (including that blank which will not be in the final kit).

also available in other colors ...

7bit, i paid my invoice #0608 a few days ago, can i get a confirmation that i did everything i was supposed to? WASSUP just gives me another invoice...

7bit wrote:

drrtyrokka wrote: Any chance to add some HONEYB/SPACE300/* space bars? Or is there any 3u blank normal key I can use for my Filco Minila?

These where not so really popular.


In which color do you need it?

I'd also be very interested in a 3 unit spacebar for a Minila Air. I'd like both white and black and if you have grey, that too.

I would need white and red 3u

OK, I add the 3 units space bars.

7bit wrote: Why not?

It's worse to type on too.

I have both Round5 and Retro, and I prefer the R3 bottom row of Round5. People generally use their thumbs to activate the bottom row modifiers, so the sharper edge of R4 mods digs into the thumbs.

Efthymis wrote: I'd also be very interested in a 3 unit spacebar for a Minila Air. I'd like both white and black and if you have grey, that too.

I agree , and any odd keys that are needed for the ISO air .

What about an R2 modifier kit?

Hey -
If I haven't yet received my round 5 shipment yet? Whom do I contact?
my invoice shows everything as paid.
Address + name are correct
This is for invoice 0345.

Thanks.

janvkn wrote:

7bit wrote:

Muirium wrote: [code="7bit";p=263349]OK, then I can change all of them to row 4.
[/code]
Not so sure that's a good idea!

Why not?

It's worse to type on too.

I have both Round5 and Retro, and I prefer the R3 bottom row of Round5. People generally use their thumbs to activate the bottom row modifiers, so the sharper edge of R4 mods digs into the thumbs.

I mean the SHIFT keys, not the modifiers in the bottom row!

tyrrvk wrote: Hey -
If I haven't yet received my round 5 shipment yet? Whom do I contact?
my invoice shows everything as paid.
Address + name are correct
This is for invoice 0345.

Thanks.

I've got the feeling yours is one of those orders that either came back or had no name on it.

Next shipping day is tomorrow.

OK, so bottom row is still R3?

altemark wrote: @7bit: I have a question about my order #0497. According to my internet bank, it was paid 2014-11-14, but I still get invoice reminders. Maybe there was a problem with the formatting of my street adress or something? (it features umlauts)

Any news on this? I have still not recieved any thing.

Is it possible to request a refund? I have not been keeping up on this thread for a while, and dire economic straits have struck.

altemark wrote:

altemark wrote: @7bit: I have a question about my order #0497. According to my internet bank, it was paid 2014-11-14, but I still get invoice reminders. Maybe there was a problem with the formatting of my street adress or something? (it features umlauts)

Any news on this? I have still not recieved any thing.

Is it possible to request a refund? I have not been keeping up on this thread for a while, and dire economic straits have struck.

Found your money.


Because I've cleared your order, I've looked for it in the messages to the bot and also found messages in which you told the bot that you paid. Would have been better to bug me instead.


However:
You missed nothing, nothing has been delayed. Your HONEYB order is currently in preparation (SP started to make the tools for the new legends).

When is the payment deadline ? for 5a ? Can i order now and pay on 14th ?

I will further back up what janvkn said by pointing out that even the edges of R3 keys on the thumb row dig into my thumbs unless the keyboard is angled up with the pull-out feet. Putting R4 keys there would make the situation even worse, IMO.

I'm very glad to see that 7bit isn't planning on putting R4 mods on the bottom row ala SA Retro.

7bit wrote: OK, I add the 3 units space bars.

Thank you very much! Do you know if there are other keys special to the Minila that are not available in this round? I think they are all there but if you know of something missing please advise. Thanks again.

tofagerl wrote: OK, so bottom row is still R3?

Yes.

andrewjoy wrote: When is the payment deadline ? for 5a ? Can i order now and pay on 14th ?

Yes, please.


Quantities are not fixed, but legends will be in a few hours!

Efthymis wrote:

7bit wrote: OK, I add the 3 units space bars.

Thank you very much! Do you know if there are other keys special to the Minila that are not available in this round? I think they are all there but if you know of something missing please advise. Thanks again.

It's your task to find that out!


Last call for additions to this kit:

Hint: anything can get into this kit, even Minila specific keys.

7bit wrote: Last call for additions to this kit:

Hint: anything can get into this kit, even Minila specific keys.

How about a 1U, R3 "transmit"? I'd be into a red one.

I'm afraid, it can only be a TRANS-,MIT key (the text in 2 rows). However, we already have an XMIT key.

Last call!


5 or 6 3 keys can be added. Anything goes!


edit: I can't wait any longer, so I add keys I think I want myself.

R1: RENAME, SEARCH

7bit wrote: I'm afraid, it can only be a TRANS-,MIT key (the text in 2 rows). However, we already have an XMIT key.

I'd be cool with XMIT.