deskthority

Hi Miurium/7bit,

Is there any chance in the future there will be blanks for the rest of the keys that are currently unavailable? (i.e. Row 3: 125, 175, 200, 225, 275, numpad '+', and numpad 'Enter'). I'd really love to build a blank keyboard with a few highlights.

Thanks. I appreciate your group buy.

Future plans is 7bit's department. I run the dark ops side of this engagement.

@7bit! finally it's coming through!

sqapy wrote: @7bit! finally it's coming through!

Do you have an estimate of the time between when it shipped out and when you got it? I'm in NC, so I should be looking at about the same amount of time. Thanks.

Wet wrote:

skaloola wrote: I sent an order to 7bot yesterday hoping for some extras/ stuff from round5a but its just sitting in my "Outbox"

That's how the system works, you'll get a reply in your email within 24 hours. In the meantime you can check for any errors to prevent any further corrections

It's now been 48 hours.. still just sitting in my outbox.

skaloola wrote:

Wet wrote:

skaloola wrote: I sent an order to 7bot yesterday hoping for some extras/ stuff from round5a but its just sitting in my "Outbox"

That's how the system works, you'll get a reply in your email within 24 hours. In the meantime you can check for any errors to prevent any further corrections

It's now been 48 hours.. still just sitting in my outbox.

A bunch of those "sit" in the Outbox. All of my initial sent messages are still unread in the Outbox, but they've been replied to long ago.

If you've gotten the Sent screen after you first sent it, you're fine.
I made another payment for my Round 5a order and have yet to receive a revised invoice. He's probably just busy.

justcallmecrash wrote:

sqapy wrote: @7bit! finally it's coming through!

Do you have an estimate of the time between when it shipped out and when you got it? I'm in NC, so I should be looking at about the same amount of time. Thanks.

So Initially i found out the tracking number on my invoice by 7bot on 21st, then for couple days it didn't appear neither on deuchepost or USPS, after 7Bit told me just keep looking on USPS site with same tracking number, it finally appeared there in 25th, and it went to NJ today, but destination is California, i hope it will come this week, will let you know once i get it!

romevi wrote:

skaloola wrote:
It's now been 48 hours.. still just sitting in my outbox.

A bunch of those "sit" in the Outbox. All of my initial sent messages are still unread in the Outbox, but they've been replied to long ago.

If you've gotten the Sent screen after you first sent it, you're fine.
I made another payment for my Round 5a order and have yet to receive a revised invoice. He's probably just busy.

Hmm ok, well I never got any reply either. I'm confused by what you mean by "busy"? I thought it was a bot..?

Also, is there a way to check that the stuff in my order is actually in stock?

If you order leftovers the stock will be shown in the response email. All the 5a have yet to be made, so are not "in stock".

Does 7bot get updated periodically with those who have paid? Couldn't find any sort of information via the wiki/FAQ really. Submitted an order, paid through Google Wallet and put in the text 7bot told me to.

Waited a few days and sent a WASSUP to 7bot and it sent me another invoice like I hadn't paid yet.

Order number was 677.

Yeah evilcamels (separate person) collects money, tells 7bit, then 7bit updates it and bot will give you a paid invoice. It's like a 4 step process, you're fine, I know it's confusing if you're new.

Quick question, why does SP have 400 space mold when they don't have 6.0? Makes no sense to me...

Presumably because someone paid for it. That's how they roll.

Does make perfect sense!

They have an 8 units space bar, which was very popular at the time those keys have been originally designed.

The only odd thing for me is why they don't have the tools for 10 units space bar.


4 units seems to be popular among POS keyboard manufacturers, like Tipro for example.

Huh...

OK, I've been thinking, and this is what I'm planning to order:
TKL/CADET, cause duh.
ALPHA/WHITE cause purdy
TKLBASE/BLACK cause black is the new black is the new orange is the new whatever.

That gives me white/blue, white/black, gray/blue (cadet) and grey/black as color options. In addition I've ordered a few red mods like spacebar, return and escape to liven up.

Thoughts? I considered TKLBASE/RED, but I think red will look better as a color pop three places on the keyboard. As a whole modbase it gets too busy dominating.

Hello, I had one of the first orders that was listed as being packed (0200). I never received a shipment confirmation, I just want to make sure it's not lost...

Guess what is missing:
ADDRESS
356 Night place
San Jose, CA
98765
USA

Thanks for the help. Maybe ease up on the sugar.

Phill1 wrote: Yeah evilcamels (separate person) collects money, tells 7bit, then 7bit updates it and bot will give you a paid invoice. It's like a 4 step process, you're fine, I know it's confusing if you're new.

Thank you very much! I know patience is a virtue, so I'm not alarmed at all it isn't coming through just yet.

Looking forward to joining the wait for 5a. I'll have to buy a couple of new keyboards to put the caps on anyway.

What's going to be the difference between 5A and 6, btw? I see 7bit is working on legends, but are they the same legends somehow? Better versions of the legends? Doesn't quite seem worth it to redo the same kit with different legends _again_...

tofagerl wrote: What's going to be the difference between 5A and 6, btw? I see 7bit is working on legends, but are they the same legends somehow? Better versions of the legends? Doesn't quite seem worth it to redo the same kit with different legends _again_...

These are new legends that do not exist in SP's repertoire.





If you mean that Symbiosis kit, they are partly wrong and are too small and some look ugly.

Is Q getting a real bar this time? SP's doubleshot Q looks too much like an O to me.

Order deadline is 9/30!? I don't think I am going to make it

7bit wrote:

tofagerl wrote: What's going to be the difference between 5A and 6, btw? I see 7bit is working on legends, but are they the same legends somehow? Better versions of the legends? Doesn't quite seem worth it to redo the same kit with different legends _again_...

These are new legends that do not exist in SP's repertoire.





If you mean that Symbiosis kit, they are partly wrong and are too small and some look ugly.

I count 26 new legends there. That's $1300 just for the legend plates. Was that additional cost folded into the price for the CADET kits?

I reckon 7bit ought to run a poll with multiple options for the new legends in Round 6. I'm ***much*** more interested in icon mods than a whole new design of alphas. Though maybe Greek, or a complete Helvetica doubleshot set would get me aboard…

As much as I love IBM's APLs, they're really all about the tripleshot / dual legend colours. If both legends are the same colour, it just looks crowded.

nosage wrote: Order deadline is 9/30!? I don't think I am going to make it

Don't worry. It's a rolling deadline.

Do you mean Helvetica Rounded?

Possibly, given doubleshot's limitations. I'm more into Helvetica Neue myself, but I'm used to the ideal world of pixels, not plastic.

nosage wrote: Order deadline is 9/30!? I don't think I am going to make it

No worry, just order right before the 10/31 deadline.

zslane wrote: I count 26 new legends there. That's $1300 just for the legend plates. Was that additional cost folded into the price for the CADET kits?

Costs for new tools are always spread accross all kits.

I received the wrong spacebar with my order. I ordered a spacebar 6.25 units but I got one that looks to be 7 units wide (see attachments). Is there a way to still receive the correct spacebar?

Muirium wrote: Possibly, given doubleshot's limitations. I'm more into Helvetica Neue myself, but I'm used to the ideal world of pixels, not plastic.

Yeah, given the issues involved with double-shot legends and the methods with which they are made at SP, asking for non-rounded anything (like Helvetica or Helvetica Neue) is sort of pointless. Dye subbing is another matter, of course, but even there I don't feel the results are quite as sharp as double-shot plastic (to say nothing of the light-on-dark problem).