deskthority

Supergeek wrote: Is the Space Cadet set supposed to have black text on some mods? http://deskthority.net/wiki/File:HONEYB_TKL_CADET.png

Yes.

I really want to get a Space Cadet key set that will work on: https://www.massdrop.com/buy/infinity-keyboard-kit .

I noticed the Backspace key is on a different row, will this cause a problem? Do you suggest buying individually or as a kit?

7bit wrote: I might add the HONEYB/SHIFT200/VIOLETT

I will place an enormous order if this happens.

Happend.

Okay give me a couple days

NOT SO NICE WHEN YOU HAVE TO WAIT IS IT 7BIT

*cough*

Yslen wrote: NOT SO NICE WHEN YOU HAVE TO WAIT IS IT 7BIT

*cough*

Don't worry, my timeline is dependent on my paycheck, not some plastic manufacturer halfway across the world.

lefthandedspatula wrote:

Yslen wrote: NOT SO NICE WHEN YOU HAVE TO WAIT IS IT 7BIT

*cough*

Don't worry, my timeline is dependent on my paycheck, not some plastic manufacturer halfway across the world.

Tell him you have a "rolling payday"

It's been so long since I ordered that I have stopped using the keyboard I originally ordered this for (TEK, now I just use all TKL boards.) I'm going to have a bunch of specific keys I won't need anymore.

You are not alone!

In Round 3 I've mad sure I've got all keys for the G80-2100.


By when Round 3 ended, I got the Tipro I'm still using.


Round 4 came with the necessary keys, but also with sphericals I was unsure if I relly like them.


Now, I abandoned cylidrical key caps and run Round 5 which will finally have all the keys I ever need for the Hyper7, except that I really want the Space Cadet keys ...

And row 4 mods. Don't forget about those. Topre can do them just nicely. We should have them too!

Cylindricals mixed with sphericals? Blasphemer!

linuxdude wrote: I really want to get a Space Cadet key set that will work on: https://www.massdrop.com/buy/infinity-keyboard-kit .

I noticed the Backspace key is on a different row, will this cause a problem? Do you suggest buying individually or as a kit?

I'd also like to see a row 2, 1.5 unit Backspace in Round5a. qHACK default layout is like that as well. Any chance of that happening?

Hi! I have couple of questions about this gb. Sry if my questions was asked earlier.
So i wanted to buy some of leftovers keycaps: Are they still available? And if they are, when i will get it if i place order today?
Also how much will cost shipping to Russia?

Thank you. And again, sry for this dumb questons.

These are available: Shipping is $7 worldwide.

Insured shipping and tracking comes extra.

Am I a bad person if i get the Symbiosis imposters and the Round 5a Cadet kit.

SL89 wrote: Am I a bad person if i get the Symbiosis imposters and the Round 5a Cadet kit.

Getting a Round 5a kit is always good!


Symbiosis, on the other hand might be bad for you and other people.

I would have gotten the 1976 set if it wasn't all row 3. Symbiosis is also all row 3. Isn't the point of SA having a sculptured profile?

My Filco set is all Row 3, its the only SA i know and it still feels nicer then DCS/CHERRY/OEM or DSA to me.

If I hadn't tried a full sculpted set, I'd probably say that too. But they're really quite a lot better when angled properly.

I'm probably going to end up with both... For science!

Even though I placed my Round 5a order I must confess... I also got the symbiosis kit...

REPENT FOR YOUR SINS!!



Which one arrives in the mail first, I wonder? Symbiosis or Round 5! Place your bets.

Incognito wrote: Now that we have come this far - perhaps it would be feasible have some sort of progress indicator in the title of this thread? I seem to remember 7bit doing something like that i Round4. Perhaps something like
received: 90%; sorted: 28% ; dispatched: 0% ?

Then we'd have to have separate ones for R5 and R5a right?

Ohh that's dangerous

I meant it's dangerous to speculate about SP and their production times. Especially after the delays for round 5

No comment.

SL89 wrote: ... the delays for round 5

:'(