mechanical keyboard authority
http://www.deskthority.net/
7BIT: 0zoidbergslo wrote:PHISO150 is mounting plateYou need to add stabilizers. STAB700 1 (for 7unit space) but I have no idea how many STAB200 you need (one in backspace, one in right shift, dunno about iso enter and left shift)
fixed the PHISO150.dirge wrote:So what about this instead of the phisobrownkit? Does that make sure that I get the cherry 1.5 spacing right to use the doubleshots?
TEENSY 1
PHANTOM 1
PHISO 1
STAB700 1
STAB200 5
DIODE 100
MXRED 90
MXRED 2
MXBLUE 2
MXBROWN 2
MXCLEAR 2
MXBLACK 2
MXGREEN 2
MXGREY 2
MXDARKGREY 2
Get sphericals in the Round 4 group buy. They are the least rarest!dirge wrote:Thanks very much I owe people beers!
I forgot to put the postage code on the end of my order, I should have had a line with ShipEu for United Kingdom!
I just need to get some cherry uk iso doubleshots, how rare are they? lol
You can hand-wire but I doubt it will be cheaper than getting a PCB.Icarium wrote:Does plate mounting require a PCB or could it be done without wiring by hand?
I think we will order 100 or so phantom PCBs but the price does not go down.mintberryminuscrunch wrote:so, did we reach 100 pcs? will the price go down a bit?
well, then...7bit wrote:(...) 7BIT wins!
you would have to glue the switches to the plate since nothing is holding them in place7bit wrote:You can hand-wire but I doubt it will be cheaper than getting a PCB.Icarium wrote:Does plate mounting require a PCB or could it be done without wiring by hand?
Also, it will be a bit instable without the PCB.
No, the plate keeps the switches in place, but I would really recommend a PCB, the wiring will be a mess =Pmintberryminuscrunch wrote:you would have to glue the switches to the plate since nothing is holding them in place7bit wrote:You can hand-wire but I doubt it will be cheaper than getting a PCB.Icarium wrote:Does plate mounting require a PCB or could it be done without wiring by hand?
Also, it will be a bit instable without the PCB.
yea but everytime you try to pull a cap you'll pull the entire switchPrinsValium wrote:No, the plate keeps the switches in place, but I would really recommend a PCB, the wiring will be a mess =Pmintberryminuscrunch wrote:you would have to glue the switches to the plate since nothing is holding them in place7bit wrote: You can hand-wire but I doubt it will be cheaper than getting a PCB.
Also, it will be a bit instable without the PCB.
I'm not as sure about that as you seem to be...mintberryminuscrunch wrote: yea but everytime you try to pull a cap you'll pull the entire switch ;)
that probably effects all non euro statesHzFaq wrote:7bit, is there a paypal option? For a bank transfer my bank are asking for all kinds of retarded details (your banks address, your personal address, phone numbers etc).
Same here, and I need to know if bot take the last address sent as valid because I made mistake first time.Ascaii wrote:still no payment invoice for me. 7bit, please check it.
Just add PAYPAL to your orders.HzFaq wrote:7bit, is there a paypal option? For a bank transfer my bank are asking for all kinds of retarded details (your banks address, your personal address, phone numbers etc).
No address, no invoice!Ascaii wrote:still no payment invoice for me. 7bit, please check it.
OK, added.gimpster wrote:I sent in my address a day or two ago, but still no invoice. Shall I resend?
It is cheaper because I had forgotten to correct the kit prices.yench wrote:i got a second invoice today that is cheaper than the first one. which is the correct one? i suppose the later. how likely is it that there'll be further changes to the prices?
Copied straight from the website;7bit wrote:Just add PAYPAL to your orders.HzFaq wrote:7bit, is there a paypal option? For a bank transfer my bank are asking for all kinds of retarded details (your banks address, your personal address, phone numbers etc).
BTW: Do you've got a link or a scan of what you have to fill in?
It doesn't mention the recipients phone number there but it definitely asks for it!Hz's Stupid Banks Website wrote:Create a new international recipient
To create a new international recipient, you'll need to give us the recipient's full name and address, the full name and address of your recipient's bank and your recipient's bank account number.