deskthority

Posted: **04 May 2017, 22:01**

Check their marketplace rules. I think it's stickied at the top of the classifieds subforum.

Posted: **06 May 2017, 00:42**

What's a NiB G81-1800 case with original box worth? The box has all the original documents, and is in basically perfect condition.

Posted: **06 May 2017, 03:01**

removed

Posted: **06 May 2017, 03:59**

taylorswiftttttt wrote:
gnmar2723 wrote: What's a NiB G81-1800 case with original box worth? The box has all the original documents, and is in basically perfect condition.
Weren't they selling for $100 on ebay?

He ask only case. They 're selling 100$ for keyboard.
I think case worth 25$. Maybe someone only need keycaps & selling case & cable.

Posted: **06 May 2017, 04:52**

quochung1989 wrote:
taylorswiftttttt wrote:
gnmar2723 wrote: What's a NiB G81-1800 case with original box worth? The box has all the original documents, and is in basically perfect condition.
Weren't they selling for $100 on ebay?
He ask only case. They 're selling 100$ for keyboard.
I think case worth 25$. Maybe someone only need keycaps & selling case & cable.

Just the case, I'm keeping the cable for myself too

$20-$25 is was my guess as to the case's value.

Posted: **06 May 2017, 13:44**

Yep. Good luck finding someone to buy it, though.

Posted: **08 May 2017, 08:47**

Since I keep getting low-ball offers for this I think it's time to do this the proper way; seasoned DT'lers have a look at my Model M and please tell me what you think it's worth thanks. It's not bolt-modded, there is no damage or minor scruff
on the case. Fohat already gave me his estimate.

for-sale-f55/ibm-1390133-iso-t16056.html

: IMGP5339.JPG (1015.32 KiB) Viewed 9196 times

Posted: **08 May 2017, 08:49**

seebart wrote: Since I keep getting low-ball offers for this I think it's time to do this the proper way; seasoned DT'lers have a look at my Model M and please tell me what you think it's worth thanks. It's not bolt-modded, there is no damage or minor scruff
on the case. Fohat already gave me his estimate.

for-sale-f55/ibm-1390133-iso-t16056.html

IMGP5339.JPG

somewhere around 120€

Posted: **08 May 2017, 13:03**

The UK version of that model went somewhat consistently for around £100, so I imagine it's something similar for the German version. The US version tends to be a bit cheaper.

That's a rainbow plate model, right? Basically if you want a German Model M, this is the version you want.

Posted: **08 May 2017, 18:09**

For someone in your market - especially someone looking for a German/Qwertz Model M, I would think this is the one to have - 100 - 120 Euro. If this were selling to a North American...maybe $80 to $90 USD.

Posted: **08 May 2017, 22:26**

Hello everyone, how much can I ask for this NMB RT-102?
The case is slighty yellowed, other than that it's in great condition and, most important of all, it works.
By the way the switches are tactile and the key caps are dye sub pbt, Italian layout.

Posted: **08 May 2017, 22:31**

snoopy wrote: somewhere around 120€

Chyros wrote: The UK version of that model went somewhat consistently for around £100, so I imagine it's something similar for the German version. The US version tends to be a bit cheaper.

Harshmallow wrote: For someone in your market - especially someone looking for a German/Qwertz Model M, I would think this is the one to have - 100 - 120 Euro. If this were selling to a North American...maybe $80 to $90 USD.

Thanks guys, 120 is what fohat quoted also, I'll update my sales thread. Yes it does have the rainbow plate Chyros.

Posted: **09 May 2017, 15:45**

How much can I realistically expect to get for an industrial model M ANSI layout?

Posted: **09 May 2017, 15:49**

Half-Saint wrote: How much can I realistically expect to get for an industrial model M ANSI layout?

Depends on the Model and the condition. For the most common one starting at USD 200.

Posted: **09 May 2017, 16:47**

It's a model F7 from 1991. Black label.

Sent from my XT1032 using Tapatalk

Posted: **09 May 2017, 18:11**

Half-Saint wrote: It's a model F7 from 1991. Black label.

Sent from my XT1032 using Tapatalk

F7 will refer to the plant, not the model. What's the part number of the keyboard? Should start with 139 most likely.

Posted: **09 May 2017, 18:23**

Ah yes, my bad. Part number is 1394946.

Sent from my XT1032 using Tapatalk

Posted: **10 May 2017, 08:32**

Hello everyone,

How much do you think this IBM Model M worth ? https://goo.gl/photos/4EEq9AmZGoyzjQ5Z7

I haven't verified it yet...and I'm thinking about keeping it to myself to restore and use.

Thanks !

Posted: **10 May 2017, 12:16**

Blue badge, fairly standard type, dirty, missing keycaps, presumably untested; I'd say $40 tops.

Posted: **10 May 2017, 20:56**

102 white complicated alps
a little dusty on the inside but it does not affect the feeling much imho

Posted: **11 May 2017, 00:23**

Scottex wrote: 102 white complicated alps
a little dusty on the inside but it does not affect the feeling much imho

Pine or bamboo?

Posted: **11 May 2017, 00:56**

pine (with slits

)

Posted: **11 May 2017, 08:15**

Would've been $30 or so back in the day, nowadays perhaps a bit more.

Posted: **11 May 2017, 12:55**

$too dorer

Posted: **12 May 2017, 02:11**

Chyros wrote: Blue badge, fairly standard type, dirty, missing keycaps, presumably untested; I'd say $40 tops.

For a moment I thought you were quoting Half-Saint's 1394946 Industrial.
(Boy Unicomp sure devalued industrials with all those back-stock cases

)

Posted: **12 May 2017, 07:44**

Aer Fixus wrote:
Chyros wrote: Blue badge, fairly standard type, dirty, missing keycaps, presumably untested; I'd say $40 tops.
For a moment I thought you were quoting Half-Saint's 1394946 Industrial.
(Boy Unicomp sure devalued industrials with all those back-stock cases )

I don't really see how, the blue badge on them REALLY doesn't fit the grey colour scheme imo.

Posted: **12 May 2017, 18:12**

Hello everyone,

How much can I reasonnably ask for a brand new DT225 trackball? (PS/2, grey model)

Thanks!

Posted: **12 May 2017, 19:05**

Posted: **12 May 2017, 19:21**

Thank you for the estimation, I think I will put it on sale soon on the forum when I will find the courage to make some pictures. Notice to the fans of solid trackball!

Posted: **12 May 2017, 23:50**

Chyros wrote:
the blue badge on them REALLY doesn't fit the grey colour scheme imo.

It didn't take me more than 5 minutes to remove the blue badge and replace it with one of the black reproductions.

deskthority

Price Check: How much is my _____ worth?

Re: Price Check: How much is my _____ worth?

Re: Price Check: How much is my _____ worth?