deskthority

Those pictures are just from before I got my SPH leftovers. I have a blue row 1 ESCAPE now, which is usually on my keyboard but when you're shooting for Deskthority and you have a wingnut…

Could still use a row 1 EJECT though. Fortunately the red one in Round 5 will go nicely.

Just wanted to say thanks for putting this together. I made an account just to order, so consider this to be verification that I'm a human.

Can I just ask what the difference between the ergodox set (HONEY/ERGO) and ergodox row 3 (HONEY/ERGO/R3) is?

squarefrog wrote:Can I just ask what the difference between the ergodox set and ergodox row 3 is?

Ergodox Row 3 contains all Row 3 profile caps, whereas the Ergodox set contains sculpted keys. You can see the SP profiles here: http://www.keycapsdirect.com/key-caps.php

Thank you. I presume its just personal preference which is better? I've never used either before so I dont know which would be a good starting point.

Which "family" are the keycaps?

A lot of people like the sculpted keys. Most keysets on keyboards are sculpted in some way, but most keyboards have the DCS (cylindrical) profile rather than the SA (spherical) profile that these keys are. If you were fitting a normal board, most people would choose sculptured.

The R3 kit for the Ergodox is interesting, because most ErgoDoxes are fitted with non-sculpted keys (due to convenience mostly, I believe; there aren't too many sets available for it, so it's easy to just get a bunch of the same key). I have the DSA (spherical) keys on my Ergodox, and it works fine, but I want sculptured keys for it. So yes, it's a matter of preference. A lot of people want to stick with the flat profile, so the R3 kit is offered.

Take a look at Muirium's blue and grey 60% board a few posts up. He has a picture of the side which really shows off the SA profile. Keep in mind that the Ergodox is flat, however, so imagine that profile on a flat board, and think if that's something you'd like.

EDIT:
I didn't answer your question, haha.
All kits in this buy are SA profile.
The Ergodox R3 kit contains ONLY ROW 3 of the SA profile, so all the keys are the same height.
Most normal keyboards use the DCS profile.
Most Ergodoxes from Massdrop will have the DSA profile, so the R3 kit is a close match to DSA.

I understand now! Thanks for the reply I appreciate it.

lefthandedspatula wrote: Take a look at Muirium's blue and grey 60% board a few posts up.

Muirium's blue and grey keyboard? Never seen that... did he really post pics of it?

its about half way up on this page.

I really like the blue and grey! Really smart.

I *think* i'm going to go with the full sculpt. I can always get a flat set later if it bugs me.

snoopy wrote:Muirium's blue and grey keyboard? Never seen that... did he really post pics of it?

Yeah, it's quite easy to miss whatever I'm up to!

I just ordered the graphite TKL set, the red TKL base set and a space bar for my Filco with browns. That is going to look delicious.

Pretty much guaranteed. But only one space bar?

7bit: how are white mods looking now?

kungfoo wrote:I just ordered the graphite TKL set, the red TKL base set and a space bar for my Filco with browns. That is going to look delicious.

Personally I'd want a black, red a Grey space for that, so you can swap them around and have spares etc.

Personally, I'd want a red, black, and grey KIT for that, so you can swap, have spares, etc.

I got offered a job

<orders more keycaps>

I could use a new job. Specifically one where I can bring a keyboard from home

I might want to add the space bars indeed.

dang this demmed robut. update me, will ye!

lefthandedspatula wrote:I could use a new job. Specifically one where I can bring a keyboard from home

I brought my keyboards to work one day...

Yes megnin we already established you have a problem

I work in a laboratory, so the researchers and technicians all share the same computers, often eating lunch at them. I'll be damned if I bring in my board, only to have it filled with Dorito crumbs and melted in a puddle of methyl ethyl ketone.

Ah, good point. I'd probably cry.

I work in a little office all by myself, so using my keyboard is not a problem.

I have two PCs (I'm in IT) so I have two HHKB's on my desk. ... I lock my door when I leave.

Megnin, How many hands do you have? more than the two normal people are equiped with?
Nice collection BTW, I must admit that I am a little jealous.

I guess he has two hands and types on one keyboard per hand. Looking at his avatar, I bet he also has two monitors ...

I may have made a slight mistake. I submitted and order and received the invoice on February 5th. I thought I missed the payment due date so I resubmitted my order to 7bot, but on further inspection of my first invoice I saw that I still had one more to submit payment. I went ahead and sent a payment for the first invoice, but what should I do about the second order? Should I just ignore it, will my first payment only count towards half the keys total in no particular order? Should I just try removing the second set of keys through messaging 7bot?

zacjor1 wrote:I may have made a slight mistake. I submitted and order and received the invoice on February 5th. I thought I missed the payment due date so I resubmitted my order to 7bot, but on further inspection of my first invoice I saw that I still had one more to submit payment. I went ahead and sent a payment for the first invoice, but what should I do about the second order? Should I just ignore it, will my first payment only count towards half the keys total in no particular order? Should I just try removing the second set of keys through messaging 7bot?

You can only have one invoice, each new one overrides the previous. If you have too much on your most recent invoice just remove what you don't want by messaging 7bot.

Yslen wrote:

zacjor1 wrote:I may have made a slight mistake. I submitted and order and received the invoice on February 5th. I thought I missed the payment due date so I resubmitted my order to 7bot, but on further inspection of my first invoice I saw that I still had one more to submit payment. I went ahead and sent a payment for the first invoice, but what should I do about the second order? Should I just ignore it, will my first payment only count towards half the keys total in no particular order? Should I just try removing the second set of keys through messaging 7bot?

You can only have one invoice, each new one overrides the previous. If you have too much on your most recent invoice just remove what you don't want by messaging 7bot.

Alright, awesome, I'll wait to see what comes in on the updated invoice then.

Did we get a decision on the white mods? I'm still waiting to see if I should pay for them or not.

sean4star wrote:Did we get a decision on the white mods? I'm still waiting to see if I should pay for them or not.

Buy them. They are pretty and you want them.

Interested in buying a set for my Das keyboard. Similar to Daybreak365's design http://i.imgur.com/elYtU2Q.png but with Mac modifier keys. Could somebody help out a first time board member and prospective buyer with the pricing? I'm guessing around $85?

Thanks!

Try this:

HONEY/SIXTY125BASE
HONEY/ALPHA
HONEY/APPLE125
HONEY/CURSORBASE/BLACK
HONEY/CURSOR/R3/BLACK
HONEY/CURSORBASE
HONEY/NUMPAD/GREY
HONEY/F1TOF12

or try this, see which is cheaper:

HONEY/STANDARD125
HONEY/APPLE125
HONEY/CURSORBASE/BLACK
HONEY/CURSOR/R3/BLACK
HONEY/REDESCAPE/R1
HONEY/NUMNUM/GREY

NEITHER of those sets contains the Red NumLock you're looking for. It looks like the cheapest way to get that key is to get HONEY/NUMOP/RED. Depending on your budget, it's up to you.