Page 111 of 159
Posted: 19 Mar 2017, 23:55
by Honthro
Have these gone up in value for a BNIB one to be worth anything?
link:
http://imgur.com/a/vISMz
Posted: 20 Mar 2017, 00:31
by fohat
Honthro wrote: Have these gone up in value for a BNIB one to be worth anything?
If those are the dye-sub PBT caps they are very desirable.
That keyboard is a magnificent candidate for a "top end" switch mod.
Posted: 20 Mar 2017, 00:39
by Honthro
fohat wrote: Honthro wrote: Have these gone up in value for a BNIB one to be worth anything?
If those are the dye-sub PBT caps they are very desirable.
That keyboard is a magnificent candidate for a "top end" switch mod.
Pretty sure it's your run of the mill ABS. I have another Dell AT101W and it's the same type of thin keycaps
Posted: 20 Mar 2017, 00:42
by dede4metal
This guy has no idea what these two apple keyboard are worth. Me neither, could you help?
http://www.subito.it/hobby-collezionism ... 272107.htm
Posted: 20 Mar 2017, 00:58
by fohat
Honthro wrote:
I have another Dell AT101W and it's the same type of thin keycaps
"W" always has lasered ABS that aren't very good.
If that serial number says 28K it may well be early enough to have the good ones.
Posted: 20 Mar 2017, 01:15
by alh84001
Barely anything keyboard-wise. First one is the Apple IIc computer, but the A2S4000 model which comes with apple hairpin switches which are (supposedly) horrible. Second one is
wiki/Apple_Keyboard_II (it doesn't have alps switches)
Posted: 20 Mar 2017, 01:21
by Honthro
fohat wrote: Honthro wrote:
I have another Dell AT101W and it's the same type of thin keycaps
"W" always has lasered ABS that aren't very good.
If that serial number says 28K it may well be early enough to have the good ones.
Actually I think you might be right. I compared the W to this BNIB one and the keys sound distinctly different. The BNIB one is much lower pitch and thockier sound. What would this go for on ebay or deskthority?
Posted: 21 Mar 2017, 12:17
by dede4metal
I bought a 1391472 Model M SSK quite clean, that needs bolt modding for 180 GBP, did I do well?
Posted: 21 Mar 2017, 18:27
by taylorswiftttttt
removed
Posted: 21 Mar 2017, 19:28
by need
dede4metal wrote: I bought a 1391472 Model M SSK quite clean, that needs bolt modding for 180 GBP, did I do well?
That's from a UK vendor, right?
That has been sitting there for a very long time now...
Posted: 22 Mar 2017, 01:05
by dede4metal
I have seen that one but mine was from a guy on gumtree
Posted: 22 Mar 2017, 11:34
by dede4metal
Ciao again
can you see anything interesting in this selection? To me is all crap
http://www.subito.it/informatica/tastie ... 976935.htm
Posted: 22 Mar 2017, 12:13
by Nuum
The IBM board is a Model M2, but the rest are rubberdomes.
Posted: 22 Mar 2017, 17:58
by bell peppers
how much for a blue badge SSK in ANSI with recently replaced springs in the UK?
Posted: 22 Mar 2017, 18:01
by taylorswiftttttt
removed
Posted: 22 Mar 2017, 18:01
by emdude
SSK prices have been in a downward trend; I'd expect $175-200 for one.
Posted: 22 Mar 2017, 18:18
by bell peppers
what about UK prices? USD doesnt mean much to me
Posted: 22 Mar 2017, 18:30
by dede4metal
bell peppers wrote: what about UK prices? USD doesnt mean much to me
It should be in the region of 140-180 GBP depending on how much it rattles. I personally not buy a blue label one, the older ones are muuuuuch better (IMHO)
Posted: 22 Mar 2017, 20:03
by Redmaus
How much is a Filco Zero worth with in perfect condition beside some shine on the keys?
Posted: 22 Mar 2017, 20:06
by seebart
emdude wrote: SSK prices have been in a downward trend; I'd expect $175-200 for one.
Not over here.
Posted: 22 Mar 2017, 20:28
by dede4metal
seebart wrote: Not over here.
Where is over here?
Posted: 22 Mar 2017, 20:51
by seebart
dede4metal wrote: seebart wrote: Not over here.
Where is over here?
Over here:
- Unbenannt.PNG (19.53 KiB) Viewed 6161 times
Posted: 22 Mar 2017, 22:46
by Wingklip
How much is an IBM 6580 in Australian dollarydoos?
Posted: 22 Mar 2017, 22:54
by alh84001
Anywhere in AUD$200-400 range.
Posted: 23 Mar 2017, 12:53
by Wingklip
Would that include shipping or nah
Posted: 23 Mar 2017, 19:45
by alh84001
that's without the shipping
Posted: 23 Mar 2017, 19:56
by seebart
This is my Beamspring me and Wingklip were talking about, I would suggest you have more patience Wingklip since shipping is steep from Germany to Australia and the Beam is
heavy although your latest offer is tempting.
- IMG_20160616_200118.jpg (890.4 KiB) Viewed 6017 times
- IMG_20160616_200127.jpg (904.85 KiB) Viewed 6017 times
Posted: 23 Mar 2017, 20:02
by lot_lizard
seebart wrote: This is my Beamspring
...
Always loved the caps themselves on this one. Something sexy about that Eszett
Posted: 23 Mar 2017, 20:03
by Khers
Just out of interest, how much would shipping the great white from Europe to Australia be?
Posted: 23 Mar 2017, 20:09
by Half-Saint
I've got a NIB (box has been opened for photos) Lexmark branded SSK, french layout. How much would that go for nowadays?