deskthority

I'd pay $10 to $15 for a showpiece like that at most. Vintage computing collectors will probably beat you in the auction.

Well, the switches are universally disliked and indeed you can't use it with a modern computer, so it's basically decoration. So it's up to you how much you think it's worth, really. Does look really cool though .

OK thanks, I think I will propose a small price to the seller a price, but this should go to a Bull Micral 90 20 owner!

ohaimark wrote: I'd pay $10 to $15 for a showpiece like that at most. Vintage computing collectors will probably beat you in the auction.

I am one of those people that would pay more for it. Not sure how much more.

Chyros wrote: Well, the switches are universally disliked

I would not say that.

seebart wrote:

ohaimark wrote: I'd pay $10 to $15 for a showpiece like that at most. Vintage computing collectors will probably beat you in the auction.

I am one of those people that would pay more for it. Not sure how much more.
[…]

http://www.ebay.de/itm/132075613519

I'm on that one kbdfr, and I guarantee you it will go higher than $15, of course that's the whole setup.

This one has the function plastic sheet and in nice condition!

elecplus wrote:

elecplus wrote: One seriously dirty yellow blue Alps keyboard, tested. The 2@ key works intermittently. Tested with an Orihalcon cable.

IMG_5824.JPG

IMG_5825.JPG

The switch on the back says 1 2 3.
What is it worth? Somebody make a good offer?

This one is already sold.

elecplus wrote: NCR G81-3000 SAU with dark gray case and original Cherry thick PBT dye subs

IMG_5829.JPG

IMG_5830.JPG

IMG_5831.JPG

This one has also sold.

removed.

I just want to know how much my board is worth
M73-0120 (1982).
Made in USA

any thoughts on what a NovaTouch should be worth? I have a used ISO that I use regularly (but still in great condition) ato work - so that is one I am likely to keep, but I picked up a new ANSI (thinking I might want a second one to use at home) and I haven't even opened the shipping box. So if I sell the ANSI, any ideas on value? does £140 sound about right? (again, this is brand new - shipping box as well as actual retail box are both unopened!) thx

elecplus wrote:

elecplus wrote: One seriously dirty yellow blue Alps keyboard, tested. The 2@ key works intermittently. Tested with an Orihalcon cable.

IMG_5824.JPG

IMG_5825.JPG

The switch on the back says 1 2 3.
What is it worth? Somebody make a good offer?

How much would one of these cost in ISO-UK? The caps are not in good shape, but the switches feel great. The yellowing is as bad as this one. I tried to retrobright the caps with minor success.

G81-3000HAD, Made in Germany in 1984, Cherry Thick ISO DE doubleshots. I assume only the keycaps are valuable, what whould be a fair price for it?

depending on the condition, HAD sets are usually sold for 20-40€

mbc wrote: G81-3000HAD, Made in Germany in 1984, Cherry Thick ISO DE doubleshots. I assume only the keycaps are valuable, what whould be a fair price for it?

It has a date code from 1994:
wiki/Cherry_date_codes

Very good point Wodan, there were no G81-3000 in 1984 anyway. I own a G81-1000HBD from 1988 though.

OK, thank you!

Wodan and quite a few others can tell you what those nice Cherry doubleshots are worth, I'm not so much "into" G80's. Nayrcj's old Cherry is much harder to value!

alienman82 wrote: They're for sale on TaoBao for around what I was selling them for, I did not destroy your market, I simply was being fair.



https://item.taobao.com/item.htm?id=363 ... oSite=main
https://item.taobao.com/item.htm?id=362 ... oSite=main

I know you got all those dye sub sets for freaking cheap, and you're trying to sell for way too much imo.

Taobao prices don't really count. The low price comes with the territory. Besides, the Taobao ones could be in any condition, whereas yours were all pretty good.

I'd call fair a bit of an understatement. I never said it was "my market". The price I was selling it for has been the market price for years, almost without fail. If you think it's too much that's fine. If you want to sell your things for a very low price that's also fine; I can't argue with that. However, I'm understandably pissed nevertheless

what is the price for a logitech g9x used guys? Because maybe I can have 2 for sale.
Thankssss

Speaking of Dyesubs, how much would a set of SAD be?

subcat wrote: Speaking of Dyesubs, how much would a set of SAD be?

I would say the DT price for SAD caps should be 40-60€ depending on condition. Since Cherry PBT can be restored to almost better-than-NIB condition by sandblasting them, I am not worried about their condition too much when getting them.

Ebay/MM prices for SAD should be 50-100€

Always pays off to keed you eyes open tho:
https://www.ebay.de/itm/152423909169

Wodan wrote:

subcat wrote: Speaking of Dyesubs, how much would a set of SAD be?

I would say the DT price for SAD caps should be 40-60€ depending on condition. Since Cherry PBT can be restored to almost better-than-NIB condition by sandblasting them, I am not worried about their condition too much when getting them.

Ebay/MM prices for SAD should be 50-100€

Always pays off to keed you eyes open tho:
https://www.ebay.de/itm/152423909169

Thanks That Highscreen case is super nice! I assume you were the one who scooped it up?

subcat wrote: Thanks That Highscreen case is super nice! I assume you were the one who scooped it up?

That price and payment via PayPal made it an instant buy. I currently have tons of € on my PP and am forced to pay all US$ purchases from that balance at PPs horrible exchange rate so my € spending is pretty violent.

Wodan wrote:

subcat wrote: Thanks That Highscreen case is super nice! I assume you were the one who scooped it up?

That price and payment via PayPal made it an instant buy. I currently have tons of € on my PP and am forced to pay all US$ purchases from that balance at PPs horrible exchange rate so my € spending is pretty violent.

As a slave to the Australian Dollar, I can understand that.

subcat wrote: As a slave to the Australian Dollar, I can understand that.

At least we don't have to pay import tax on anything under $1000

Little less than half a year ago I bought 2 keyboards from Marktplaats (Dutch eBay), namely the Mitac KB-5201 (Chicony rebrand) and the Datacomp DFK191.

The Mitac has Monterey Blue switches and the Datacomp has SKCM White switches.
Pics: https://imgur.com/a/cqQCW#bSIlAkX
(if you want better pictures tell me, I have a better camera now)

I was planning to desolder the Datacomp board to make an alps64 custom keyboard, but I'm not sure if I would be better off selling the board for other switches or not.

If you want more info just ask. I will try to answer in the best way possible...

removed

taylorswiftttttt wrote: How much is a clean, bolt-modded IBM Model M 122 worth

Very hard to say. Probably more if you ANSI-modded it when you had it apart.