Page 92 of 179
Posted: 26 Jun 2018, 16:44
by Chyros
Felima wrote: Heya I don't have more pictures but does not anyone know what model this keyboard is? Thanks
Late Dell Quietkey. If you're lucky it still has NMB dome with slider; if not, it's just a rubber dome board.
Posted: 26 Jun 2018, 18:42
by Felima
Hello can someone identify this keyboard for me? Thank you.
Posted: 26 Jun 2018, 18:53
by davkol
derp
Posted: 26 Jun 2018, 18:55
by Felima
Oh thank you. It got din connector so I can actually use it on my computer. Thanks a lot
Posted: 26 Jun 2018, 19:26
by davkol
derp
Posted: 26 Jun 2018, 19:27
by Felima
I already ordered Soarer's converter so I think it will work.
Posted: 27 Jun 2018, 06:26
by Gamuholic
mike52787 wrote:
Most likely as you can see the capsense pads on the back of the pcb. if it was a magnetic valve version you would have 4 through hole pins.
I bought this keyboard, but I'm not sure what this switch is. It's very similar looking to ITW Magnetic Valve, but the slider is different. It's definitely not foam and foil, the slider pushes a metal contact.

- NCR Mystery Board - IMG_20180626_200323.jpg (2.18 MiB) Viewed 6651 times
Posted: 28 Jun 2018, 17:54
by 130rne
Curious on this one. Just found out yesterday it has alps switches. Found it at Goowill awhile back for $1. Googled the brand, couldn't find anything. Suggestions/advice? I know almost nothing about specific keyboards.
Posted: 28 Jun 2018, 19:12
by Blaise170
For future reference, you can usually figure out who made a keyboard by looking up the FCC ID (LIA in this case belong to Unikey). Then a quick Google search returned this:
wiki/Unikey_KB-7001.
Posted: 29 Jun 2018, 08:45
by EB3K
I have a question. I know NEC PC-9800 has blue oval switches but theres varients like 9801R, 9801V, 9801U etc. Do all these also have NEC ovals?
Posted: 29 Jun 2018, 09:42
by 00.
v should have white, r should be cream, but as far as i know neither are confirmed to use them 100% of the time
Posted: 01 Jul 2018, 06:27
by constexpr
What switches are these?
They were found on
this board. I believe the OEM to be Focus as the board has a couple of their trademark features.
Posted: 01 Jul 2018, 10:33
by Chyros
Yep, Focus dome with slider. It came on their 3rd-gen boards (FK-#200).
Posted: 02 Jul 2018, 01:12
by Bass
Might as well ask since I still haven't fully identified this particular keyboard since I found it. Only thing I know definitively is that the switches are Alps SKCC Green, there are no model stickers anywhere on it.

Posted: 02 Jul 2018, 01:56
by constexpr
Chyros wrote: Yep, Focus dome with slider. It came on their 3rd-gen boards (FK-#200).
Thanks! Your “Dome with slider megareview” provided the rest of the info I needed. Much appreciated.
Posted: 02 Jul 2018, 11:23
by foxmancore
Hey there, is this an one piece alps integrated dome switch? Board is a NEC PC8800. Thanks!
https://imgur.com/c0Tei21
Posted: 02 Jul 2018, 15:37
by Blaise170
foxmancore wrote: Hey there, is this an one piece alps integrated dome switch? Board is a NEC PC8800. Thanks!
https://imgur.com/c0Tei21
Yes, and it feels awful too. Not so nice caps either.
Posted: 03 Jul 2018, 17:38
by 701c
Does anyone know what switches this keyboard uses? It is from an apollo computer. Thanks!

Posted: 03 Jul 2018, 17:44
by Noobmaen
701c wrote: Does anyone know what switches this keyboard uses? It is from an apollo computer. Thanks!

I'm not completely sure, but it looks like micro switch ST. Compare to
this.
Posted: 05 Jul 2018, 18:17
by ScottPaladin
I think this is likely to be a Mitsumi board. Does that seem right?
Posted: 06 Jul 2018, 20:15
by PlacaFromHell
Alps switches?

Posted: 06 Jul 2018, 20:21
by Noobmaen
ScottPaladin wrote:
I think this is likely to be a Mitsumi board. Does that seem right?
Yea looks like a Mitsumi KPQ-E99YC variation
Posted: 06 Jul 2018, 20:22
by Noobmaen
PlacaFromHell wrote: Alps switches?
Should have SKCL green
Posted: 06 Jul 2018, 20:32
by PlacaFromHell
Thanks!!
Posted: 07 Jul 2018, 05:51
by Darkshado
Any ideas on this one? I suspect rubber dome, but can't quite find a match for it on the wiki. What about the windowed keys? Blockers too?

- Mystery HP keyboard
- $_59.JPG (145.82 KiB) Viewed 6213 times
Posted: 07 Jul 2018, 06:53
by xxhellfirexx
Darkshado wrote: Any ideas on this one? I suspect rubber dome, but can't quite find a match for it on the wiki. What about the windowed keys? Blockers too?
$_59.JPG
That is a rubber dome.
wiki/HP_C1429C
Posted: 07 Jul 2018, 15:11
by mannoso
This look interessting, but I can't find any info about it. Any idea?

- 78881392214486.jpg (47.66 KiB) Viewed 6176 times
Posted: 07 Jul 2018, 17:18
by rich1051414
Another Micro switch ST? Just guessing here, the cap profile looks similar.
Posted: 07 Jul 2018, 18:12
by mannoso
rich1051414 wrote: Another Micro switch ST? Just guessing here, the cap profile looks similar.
The seller sent me a picture. This is what the switch looks like:

- 19914608034780.jpg (42.11 KiB) Viewed 6146 times
Posted: 09 Jul 2018, 02:17
by Blaise170
Looks like an MSX keyboard. Most MSX computers were rubber domes, as this appears to be.