deskthority

Well, if these clear case switches were anything more than hypothetical…

I really doubt Corsair is pleased to help us with a little lenience in their 2014 exclusive contract!

Guys, i've removed the LED's from my KB. Do I need to replace them after the switch swap (or put jumpers in place) or will the KB work with the LED solder points as broken connections?

I have never had an issue not replacing the LEDs.
I wouldn't replace them with jumpers however, as this is likely to do more harm than good, as you will be creating a short circuit.

This totally depends on the PCB routing and can't be answered in a general way, imo.
For example a regular Cherry 3000 PCB uses the wires as jumper bridges to cross tracess.
I have some Cherry PCBs where the voltage trace of the LEDs is part of the voltage circuit of ICs, so if you leave them out the IC won't work. However there is a voltage drop with LEDs in place, so putting jumper wires in instead might have other harmful effects.

its a poker 2, this comes in a non=led version and I think they use the same PCB...so guess I can leave them out?

fart_toast wrote:Guys, i've removed the LED's from my KB. Do I need to replace them after the switch swap (or put jumpers in place) or will the KB work with the LED solder points as broken connections?

Just leave the points disconnected. A jumper would cause excessive current to be pulled from the driving IC which could lead to a component failure.

thanks all

7bit, could you confirm that MX white will no longer be manufactured? Until the Logitech order has been filled? Ever?

Almost forgot about my order from last year, until it just showed up on my door today. Thanks again

It has been said about clears as well. I'm not a fan of whites, but don't have any info they will not be produced anymore.

I doubt they will stop producing clears, given that they make up about 30% of all orders.

7bit wrote:It has been said about clears as well. I'm not a fan of whites, but don't have any info they will not be produced anymore.

I doubt they will stop producing clears, given that they make up about 30% of all orders.

Code: Select all

MXCLEAR   | 29%
MXRED     | 14%
MXGREEN   | 14%
MXBROWN   | 11%
MXWHITE   | 10% <-------
MXGREY    |  9%
MXBLUE    |  8%
MXDARKGREY|  3%
MXBLACK   |  2%
MXLOCK    |  1%

By this logic, they could stop producing blacks!

Yes, blacks are the worst! MXLOCK is only behind blacks because of the high MOQ (4000) for the expensive switches.

Btw I received my order 486. Thanks!

Hello 7bit! Just wanted to know how long would it take for the Cherry MX blues to be delivered to the UK? Are these switches the ones that come with a diode or not?
Many Thanks.

RedP > No diodes included, you have to buy them separately but the 1N4148 diode in DO-35 encapsulation is a very common and cheap component available in all good electronic store.

7bit, did you note that I still miss some switches (and some leftover SPH) ? Please edit my account to remember to ship them to me when they will be available

Blues are all in stock.

just got the new invoice mail : thx a lot !
Moreover, I'm not in an hurry. It can wait your next supply to be sent together

WHERE ARE MY SWITCHES, DID YOU SEND THEM YET.

#230

kaiserreich wrote:WHERE ARE MY SWITCHES, DID YOU SEND THEM YET.

#230

WHAT? SPEAK UP SON.

kaiserreich wrote:WHERE ARE MY SWITCHES, DID YOU SEND THEM YET.

#230

You ordered on 2013-07-04 and did pay on 2013-09-01, some time after I cleared your order because you did not pay, which you would have seen if you would have asked the bot.


However, both switch types are still in stock.

No chance then of clear clears? Body and stem? Are these clear shell switches just guesswork / wishful thinking?

They are not listed.

Hello,
MXBROWN/NW | 203| 0.65|EUR|MX1A-G1NN
Is this still available pls ?

S.

Yes.

Order sent !

7bit wrote:

kaiserreich wrote:WHERE ARE MY SWITCHES, DID YOU SEND THEM YET.

#230

You ordered on 2013-07-04 and did pay on 2013-09-01, some time after I cleared your order because you did not pay, which you would have seen if you would have asked the bot.


However, both switch types are still in stock.

I paid some money after that to acantophis. Can i have those think the money refunded.

I received an email saying that my payment has been received

Hey 7bit! Any news for #476?

Shipped on 2014-01-25 to czarek.

Muirium wrote:No chance then of clear clears? Body and stem? Are these clear shell switches just guesswork / wishful thinking?

Also liking the idea of clear clears! IIRC they are only making them in the main 4 blue/brown/red/black firstly.

I still want clears with transparent sliders. I was very disappointed when I first laid my hands on a sampler of MX switches and could hardly tell MX clear and white apart!