Page 8 of 25
Posted: 07 Jul 2014, 18:01
by LechnerDE
tinnie wrote: LechnerDE wrote: When is the payment deadline?
I probably won't be able to pay before next saturday. Is that still ok?
Next saturday? 12 or 19 Jul?
Saturday the 12th. Would that be okay?
If not I'd have to make a lot of arrangements to pay earlier. I'd rather not do that, but I also don't want to miss out on this GB!
Posted: 07 Jul 2014, 19:01
by Shinryuu
matt3o wrote: the plate I'm sure adds some kind of stability, but again, on a poker case the screws hold the PCB not the plate. So...
the real advantage of having a plate would be to be able to use costar stabs instead of the smooshy cherry, but these plates are not costar compatible.
anyway if tinnie has sold out the alu plates I can have some laser cut later (with costar compatibility).
Oh, I ordered 2 acrylic plates to try them out.. I prefer typing on a board with a plate. Well, you better go to make some alu ones
Re: Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERI
Posted: 07 Jul 2014, 19:02
by Zentaaa
I wish there was an option for mx mini u alu plates
Posted: 07 Jul 2014, 19:42
by matt3o
Zentaaa wrote: I wish there was an option for mx mini u alu plates
they will come. no worries
Re: Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERI
Posted: 07 Jul 2014, 19:44
by Zentaaa
matt3o wrote:Zentaaa wrote: I wish there was an option for mx mini u alu plates
they will come. no worries
Really?
Ps. Tinnie I know im the most annoying person in this gb but any eta on the acrylic case sample IM VERY EXCITED as you can probably tell x)
Posted: 07 Jul 2014, 20:06
by Muirium
Matt makes his own plates. Especially once his CNC machine is up and running.
Re: Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERI
Posted: 07 Jul 2014, 20:12
by Zentaaa
Matt.... Your a beast, Now make some plates
haha
Posted: 07 Jul 2014, 20:35
by Medowy
Posted: 08 Jul 2014, 10:25
by vsev
Paid invoice !
Posted: 08 Jul 2014, 11:58
by YUIOP
Paid my invoice as well.
Question, will these take thru-hole diodes in addition to smds? I'm asking because the sample pic in OP has no holes for diodes.
Posted: 08 Jul 2014, 12:01
by tinnie
No thru-holes diodes.
Posted: 08 Jul 2014, 13:18
by DanielT
But the PCB has the SMD diodes soldered, right ?
Posted: 08 Jul 2014, 13:28
by YUIOP
Does it? Then it's a moot point.
I have a bunch of thru-holes but no smds. If it doesn't come with them pre-soldered, I will have to buy some.
Posted: 08 Jul 2014, 13:38
by matt3o
last time I checked you only needed to add switches. thru-hole diodes are the easiest to solder btw and you can get 100 for 2 euros.
Posted: 08 Jul 2014, 13:40
by plasticchair
soldering smds however...
Nothing I should do with my $5 iron
Posted: 08 Jul 2014, 13:43
by scottc
If this doesn't have the SMD diodes already soldered, I might have to reconsider my order... but it does, right? I thought the point of this was that you only needed to add switches?
Posted: 08 Jul 2014, 14:32
by pasph
SL89 wrote: So what would i need to put together a FaceU?
How much is the case gonna be?
And when do orders close?
tinnie wrote: SL89: Switches, stabs, keycaps, a case and a usb cable and you're good to go. Case for face u is not available.
Seems that all will come presoldered
Posted: 08 Jul 2014, 15:15
by plasticchair
Even the resistors for possible LEDs?
Posted: 08 Jul 2014, 15:17
by tinnie
Everything is soldered. You just need solder switches and LEDs (if possible) to make these fuckers work-
Re: Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERI
Posted: 08 Jul 2014, 15:18
by Zentaaa
Tinnie i know i am very annoying but any eta on the acrylic cases?
Posted: 08 Jul 2014, 15:30
by tinnie
Zentaaa: I will ahve sample soon.
Re: Face U/MX-mini U replica, acrylic/alu plate, KEEP ORDERI
Posted: 08 Jul 2014, 15:31
by Zentaaa
Okay
Posted: 08 Jul 2014, 17:55
by collector of junk
paid (please check I did it right)
thanks
Posted: 08 Jul 2014, 19:18
by SL89
Of course IRL stuff gets in the way of this project :/
thank you for voiding my order Tinnie
at least there is the Red Scarf II to look forward to!
Posted: 08 Jul 2014, 19:22
by macmakkara
Paid. Then just waiting.
Posted: 09 Jul 2014, 06:16
by feizor
Hey tinnie, can you please confirm if the faceu alu plate supports 1.75u right shift, winkeyless and stepped capslock?
Thanks!
Posted: 09 Jul 2014, 06:46
by Xenderwind
Sent you a pm tinnie, let me know if its possible. If not I can figure something out.
Posted: 09 Jul 2014, 07:00
by tinnie
feizor wrote: Hey tinnie, can you please confirm if the faceu alu plate supports 1.75u right shift, winkeyless and stepped capslock?
Thanks!
Yes.
Posted: 09 Jul 2014, 07:02
by tinnie
Xenderwind wrote: Sent you a pm tinnie, let me know if its possible. If not I can figure something out.
Done.
Posted: 09 Jul 2014, 09:13
by Laser
Paid!