Posted: 05 Apr 2018, 18:18
I can't guess at which it is, but some 3277 beamsprings (for example) have non-stepped caps as well.
From hansichen's thread
Spoiler:
From hansichen's thread
Page 664 of 876
From hansichen's thread
Posted: 07 Apr 2018, 09:34
Posted: 07 Apr 2018, 09:36
green-squid wrote: Cherry G80-9009HAU for $82 dollars shipped!!!!!!!!!!
http://www.taodepot.com/item/8396247469
Code: Select all
1.Minimum order quantity 10 pieces. The freight displayed here is not accurate, we will charge you the correct freight after weighing your items.
2. We only accept West Union and T/T payment, no other payments are acceptable.Posted: 07 Apr 2018, 09:45
Oh..
Can't find any other 9009 on TB.
BUT: take a look at this: G80-9009 USB controller!
https://item.taobao.com/item.htm?spm=a2 ... t=1#detail
Can't find any other 9009 on TB.
BUT: take a look at this: G80-9009 USB controller!
https://item.taobao.com/item.htm?spm=a2 ... t=1#detail
Posted: 07 Apr 2018, 09:57
Posted: 07 Apr 2018, 10:02
I didn't even expect someone to put any work in 11800 boards. Normally you just scrap the pcb and throw the case away...
Posted: 07 Apr 2018, 10:25
Nice find!
Damn chinese community is on fire...
Damn chinese community is on fire...
Posted: 07 Apr 2018, 10:38
Posted: 07 Apr 2018, 10:41
Never in my life did I expect to see an 11800 pcb, these are switch donors and nothing more in my eyes.
Posted: 07 Apr 2018, 10:42
Posted: 07 Apr 2018, 10:50
Posted: 07 Apr 2018, 10:52
A 11800 would be an adequate place for vintage blues
Posted: 07 Apr 2018, 10:55
11800 are good to browse your phone with
Posted: 07 Apr 2018, 11:36
Here's another cool one! G80 3000 replacement PCB!
$31
I have a G81 case (cherry branded) that I could use if I bought it.
https://item.taobao.com/item.htm?spm=20 ... 3984744%7D
Wodan finds many many many G80/G81s. Would also be interesting in a cool case!
Imagine this PCB in this G81 keyboard!
$31
I have a G81 case (cherry branded) that I could use if I bought it.
https://item.taobao.com/item.htm?spm=20 ... 3984744%7D
Wodan finds many many many G80/G81s. Would also be interesting in a cool case!
Imagine this PCB in this G81 keyboard!
Posted: 07 Apr 2018, 11:57
Posted: 07 Apr 2018, 15:49
16 Model Ms (15 actually, with one Model F)
https://www.ebay.com/itm/LOT-16-VINTAGE ... 5459f1be2d
https://www.ebay.com/itm/LOT-16-VINTAGE ... 5459f1be2d
Posted: 07 Apr 2018, 16:21
Careful, there are some rubber domes in there too.Iggy wrote: 16 Model Ms (15 actually, with one Model F)
https://www.ebay.com/itm/LOT-16-VINTAGE ... 5459f1be2d
Posted: 07 Apr 2018, 16:36
Posted: 07 Apr 2018, 19:13
I'm calling 100% microswitch on this one. Beamsprings never had the thin arrows. If you look at Chyros' hall effect review video, you can see the same thin arrow pattern there, and is also seen on the 3277 microswitch hall effect boards that have been photographed.
Posted: 08 Apr 2018, 02:05
Posted: 08 Apr 2018, 04:05
Are these Signature Plastics version or some Chinese models being sold here?Laser wrote: Dyesub PBT, SA profile, 1mm thickness:
https://kbdfans.cn/collections/new-arri ... bt-keycaps
Posted: 08 Apr 2018, 04:21
They are not Signature Plastics SA, because of the ribs on the underside of the cap. SA's SAs don't have ribs like that.Elrick wrote:Are these Signature Plastics version or some Chinese models being sold here?Laser wrote: Dyesub PBT, SA profile, 1mm thickness:
https://kbdfans.cn/collections/new-arri ... bt-keycaps
Posted: 08 Apr 2018, 04:41
GREAT, simply because SP sux at Dye-sub work, every single key-cap bought from them over the years look like Unicomp's disaster's.
Just wondering why Americans have this difficulty in doing any decent dye-sub work NOW, verses what was done in the distant past?
Are the previous generations far more acute or sophisticated compared to what is produced now within the Great U,S of A?
Posted: 08 Apr 2018, 07:59
Thanks!Posted: 08 Apr 2018, 10:57
Yes, also the product details mention "WM manufacturing" (whatever that is) and "Made in China".codemonkeymike wrote:They are not Signature Plastics SA, because of the ribs on the underside of the cap. SA's SAs don't have ribs like that.Elrick wrote:Are these Signature Plastics version or some Chinese models being sold here?Laser wrote: Dyesub PBT, SA profile, 1mm thickness:
https://kbdfans.cn/collections/new-arri ... bt-keycaps
Posted: 09 Apr 2018, 19:58
Interesting terminal board. SMK J-M0404 switches?
https://www.ebay.com/itm/Vintage-Keyboa ... 3169645784
https://www.ebay.com/itm/Vintage-Keyboa ... 3169645784
Posted: 10 Apr 2018, 08:27
Another Black M13
https://www.ebay.com/itm/263597318782
https://www.ebay.com/itm/263597318782
Posted: 10 Apr 2018, 10:00
https://www.ebay.com/itm/Altima-3-Perso ... 3585163659
This looks like alps to me, at least the caps should be alps compatible.
This looks like alps to me, at least the caps should be alps compatible.
Posted: 10 Apr 2018, 19:59
Alps keyboard with Japanese doubleshots and yellows.
http://rover.ebay.com/rover/1/711-53200 ... =824&kw=lg
http://rover.ebay.com/rover/1/711-53200 ... =824&kw=lg
Posted: 10 Apr 2018, 20:01
that's Blaise170's, I'm sure you could hit him up to get around the ebay fee ?III wrote: Alps keyboard with Japanese doubleshots and yellows.
http://rover.ebay.com/rover/1/711-53200 ... =824&kw=lg