deskthority

Hate to be that person but, Any updates?

Spaceman1200 wrote:Hate to be that person but, Any updates?

Yes! Shipping to me in 8 days! Sorry for the long wait. Ill make a separate post about that later or tommorow.

wafflepc wrote:

Spaceman1200 wrote:Hate to be that person but, Any updates?

Yes! Shipping to me in 8 days! Sorry for the long wait. Ill make a separate post about that later or tommorow.

Wow that'll be a long time T.T Got the rest of the parts waiting

Cucumberino wrote:

wafflepc wrote:

Spaceman1200 wrote:Hate to be that person but, Any updates?

Yes! Shipping to me in 8 days! Sorry for the long wait. Ill make a separate post about that later or tommorow.

Wow that'll be a long time T.T Got the rest of the parts waiting

Yeah, really sorry.

wafflepc wrote:

Spaceman1200 wrote:Hate to be that person but, Any updates?

Yes! Shipping to me in 8 days! Sorry for the long wait. Ill make a separate post about that later or tommorow.

No worries! Thanks for the update

I know we have talked about Phantoms and Gon's but will this case fit a Winkeyless b87 PCB?

braidn wrote: I know we have talked about Phantoms and Gon's but will this case fit a Winkeyless b87 PCB?

I sure hope it does; mine's already here!

Parod wrote:

braidn wrote: I know we have talked about Phantoms and Gon's but will this case fit a Winkeyless b87 PCB?

I sure hope it does; mine's already here!

Probably? i dont really know.

Ok, first off thank you to wafflepc for getting me the cad file for the plate so we can get midsections made. Please let me know if I should create another thread for this. It may start to get too convoluted as one. Attached is a prelimanry drawing. I could use some feedback please as to thickness and dimensions around the usb port. Note regarding the usb port location: I based it off my GON PCB, the universal case version. It is centered between the PRINT SCREEN & SCROLL LOCK switches. Looking for help in making sure I have enough clearance from the switches too.

keysmasher wrote: Ok, first off thank you to wafflepc for getting me the cad file for the plate so we can get midsections made. Please let me know if I should create another thread for this. It may start to get too convoluted as one. Attached is a prelimanry drawing. I could use some feedback please as to thickness and dimensions around the usb port. Note regarding the usb port location: I based it off my GON PCB, the universal case version. It is centered between the PRINT SCREEN & SCROLL LOCK switches. Looking for help in making sure I have enough clearance from the switches too.

So this wouldn't be compatible with GON PCBs with the USB port on the bottom? Is the one I ordered and it seemed to fit better the original case from this post

wafflepc wrote:

Spaceman1200 wrote:Hate to be that person but, Any updates?

Yes! Shipping to me in 8 days! Sorry for the long wait. Ill make a separate post about that later or tommorow.

Currently day 7 on my side of the globe

Shipping tommorow!

wafflepc wrote:Shipping tommorow!

Shippibg to me tommorow* please contact me if you have any concerns or special needs for shipping, even if you have already told me about it.

Cucumberino wrote:

keysmasher wrote: Ok, first off thank you to wafflepc for getting me the cad file for the plate so we can get midsections made. Please let me know if I should create another thread for this. It may start to get too convoluted as one. Attached is a prelimanry drawing. I could use some feedback please as to thickness and dimensions around the usb port. Note regarding the usb port location: I based it off my GON PCB, the universal case version. It is centered between the PRINT SCREEN & SCROLL LOCK switches. Looking for help in making sure I have enough clearance from the switches too.

So this wouldn't be compatible with GON PCBs with the USB port on the bottom? Is the one I ordered and it seemed to fit better the original case from this post

I'm not sure where the usb port is located on yours. When you get it, take some measurements and pics.

keysmasher wrote:

Cucumberino wrote:

keysmasher wrote: Ok, first off thank you to wafflepc for getting me the cad file for the plate so we can get midsections made. Please let me know if I should create another thread for this. It may start to get too convoluted as one. Attached is a prelimanry drawing. I could use some feedback please as to thickness and dimensions around the usb port. Note regarding the usb port location: I based it off my GON PCB, the universal case version. It is centered between the PRINT SCREEN & SCROLL LOCK switches. Looking for help in making sure I have enough clearance from the switches too.

So this wouldn't be compatible with GON PCBs with the USB port on the bottom? Is the one I ordered and it seemed to fit better the original case from this post

I'm not sure where the usb port is located on yours. When you get it, take some measurements and pics.

Sure. It has been on Madrid (where I live) for a few days in customs... Hope it doesn't take long and I don't get charged for customs/fees

Cucumberino wrote:

keysmasher wrote:

Cucumberino wrote: So this wouldn't be compatible with GON PCBs with the USB port on the bottom? Is the one I ordered and it seemed to fit better the original case from this post

I'm not sure where the usb port is located on yours. When you get it, take some measurements and pics.

Sure. It has been on Madrid (where I live) for a few days in customs... Hope it doesn't take long and I don't get charged for customs/fees

Well, this is just an idea, you could make multiple holes for usb ports, which could make some pretty cool in-case cable management options, or space for bluetooth converters to be routed to. Just an idea. The more holes in the case the more options to have the cable come out one side, right? and if you dont do that, there should be enough room to get a male micro to a female 2.0 USB cable thats short and just route it to the whole. I dont know much about GON though, so take all this with a grain of salt.

wafflepc wrote:

wafflepc wrote:Shipping tommorow!

Shippibg to me tommorow* please contact me if you have any concerns or special needs for shipping, even if you have already told me about it.

Waffle, I'm in the middle of a move so depending on when you actually ship them I might have a different address for you but it literally depends on what day you ship. I'm on the west coast so I'm guessing it should only take a week at the most to get to me.

Theanyday wrote:

wafflepc wrote:

wafflepc wrote:Shipping tommorow!

Shippibg to me tommorow* please contact me if you have any concerns or special needs for shipping, even if you have already told me about it.

Waffle, I'm in the middle of a move so depending on when you actually ship them I might have a different address for you but it literally depends on what day you ship. I'm on the west coast so I'm guessing it should only take a week at the most to get to me.

Ok!

The GON PCB with the connector at the bottom looks like this, so it doesn't look like the connector is at the same spot.

wafflepc wrote:

Cucumberino wrote:

keysmasher wrote: I'm not sure where the usb port is located on yours. When you get it, take some measurements and pics.

Sure. It has been on Madrid (where I live) for a few days in customs... Hope it doesn't take long and I don't get charged for customs/fees

Well, this is just an idea, you could make multiple holes for usb ports, which could make some pretty cool in-case cable management options, or space for bluetooth converters to be routed to. Just an idea. The more holes in the case the more options to have the cable come out one side, right? and if you dont do that, there should be enough room to get a male micro to a female 2.0 USB cable thats short and just route it to the whole. I dont know much about GON though, so take all this with a grain of salt.

I could. I would need dimensions of where the holes should go. Does the phantom have a plug on the end? Or is it a cable?

Phantom has a cable, it plugs right into the Teensy that is soldered on board.

Looks like your Gon pcb has its usb plug in a different spot. Could you measure center of the big hole to center of the usb connector?

keysmasher wrote: Looks like your Gon pcb has its usb plug in a different spot. Could you measure center of the big hole to center of the usb connector?

Don't really understand what do you mean But if it's about sizing should be the same, just centered between F12 and Print Screen instead of between PrintSC and Scroll Lock

keysmasher wrote:

wafflepc wrote:

Cucumberino wrote: Sure. It has been on Madrid (where I live) for a few days in customs... Hope it doesn't take long and I don't get charged for customs/fees

Well, this is just an idea, you could make multiple holes for usb ports, which could make some pretty cool in-case cable management options, or space for bluetooth converters to be routed to. Just an idea. The more holes in the case the more options to have the cable come out one side, right? and if you dont do that, there should be enough room to get a male micro to a female 2.0 USB cable thats short and just route it to the whole. I dont know much about GON though, so take all this with a grain of salt.

I could. I would need dimensions of where the holes should go. Does the phantom have a plug on the end? Or is it a cable?

Phantom uses the teensy.

Cucumberino wrote:

keysmasher wrote: Looks like your Gon pcb has its usb plug in a different spot. Could you measure center of the big hole to center of the usb connector?

Don't really understand what do you mean But if it's about sizing should be the same, just centered between F12 and Print Screen instead of between PrintSC and Scroll Lock

Ahh. Ok. I will come up with something for yours.

Whats the status of shipping?

Hey people. They have shipped, and are currently... (checking AfterShip app)... "Shipment transiting from 【Shanghai Pudong Distribution Center】". It is not the fastest shipping, since it already costs a fortune to ship. It will take some time to ship.

50-53kg of plates. Yeah, im not kidding.

Here is a shitty picture of an ISO plate.



Let me know if there are any questions.

Yeah, I figured they were coming from china. FOR THE WIN!!!!

Well i have these. I think i paid 8$ for each of them.

4$ letter - untracked - ~1,5 weeks to the US

Let me know if you need a set!

LeandreN wrote: Hey people. They have shipped, and are currently... (checking AfterShip app)... "Shipment transiting from 【Shanghai Pudong Distribution Center】". It is not the fastest shipping, since it already costs a fortune to ship. It will take some time to ship.

50-53kg of plates. Yeah, im not kidding.

Here is a shitty picture of an ISO plate.



Let me know if there are any questions.

Damn they look good (and heavy). So hyped but at the same time tired of waiting :c