deskthority

blighty wrote:I added on to my order. Does the shipping stay the same if you add 2x amount of keys as your original order?

Netdewt wrote:I need a partial refund. Don't know what to do. I tried sending a PM to 7bit.

Rankrotten wrote:With the death of Geekhack I have not been around much but previously had an order in for a set of NOIR + MAC MODS + UK KIT but with the change to all symbols style I decided to cancel my order before the closing date by setting all units to 0.00 and this was confirmed and ok.

Still getting emails to purchase the keys so my question remains: Will I need to complete the purchase as the key sets appear to have been ordered? It's no problem as I will probably end up buying another cherry board in the near future anyway..

7bit wrote:

Netdewt wrote:I need a partial refund. Don't know what to do. I tried sending a PM to 7bit.

Partial refunds will be done at the end.

gbohn wrote:Hi;

I had a quick question. I was thinking of ordering some of the Noir/Standard or Round 3/TKL/Black keycaps to replace some or all of the keys on my 'das keyboard' Professional S.

Can anyone tell me if these key caps are the same 'height' as the ones I have now?

I ask just to make sure because I thought I was going to be able to use the keycaps from an old Cherry G81-8000HPBUS keyboard. I then discovered that these Cherry keys seem to have a lower profile than the keys I have on my das. (So they sit lower if mounted on that keyboard).

I was wondering what height I should expect from the group-buy keys if I ordered some.

Thanks;

zzAaron wrote:OK. i have to admit. i am 100% confused on the ordering and the names and what not.
i want mine to look like this
http://deskthority.net/w/images/0/07/Ro ... ro_001.png
can someone clarify ):

7bit wrote:

gbohn wrote:Hi;

I had a quick question. I was thinking of ordering some of the Noir/Standard or Round 3/TKL/Black keycaps to replace some or all of the keys on my 'das keyboard' Professional S.

Can anyone tell me if these key caps are the same 'height' as the ones I have now?

I ask just to make sure because I thought I was going to be able to use the keycaps from an old Cherry G81-8000HPBUS keyboard. I then discovered that these Cherry keys seem to have a lower profile than the keys I have on my das. (So they sit lower if mounted on that keyboard).

I was wondering what height I should expect from the group-buy keys if I ordered some.

Thanks;

They are the same height as Cherry. Cheap Filco key caps are different, so you should use key caps from my group buy!

gbohn wrote:

7bit wrote:

gbohn wrote:Hi;

I had a quick question. I was thinking of ordering some of the Noir/Standard or Round 3/TKL/Black keycaps to replace some or all of the keys on my 'das keyboard' Professional S.

Can anyone tell me if these key caps are the same 'height' as the ones I have now?

I ask just to make sure because I thought I was going to be able to use the keycaps from an old Cherry G81-8000HPBUS keyboard. I then discovered that these Cherry keys seem to have a lower profile than the keys I have on my das. (So they sit lower if mounted on that keyboard).

I was wondering what height I should expect from the group-buy keys if I ordered some.

Thanks;

They are the same height as Cherry. Cheap Filco key caps are different, so you should use key caps from my group buy!

Since these will probaly sit lower to the case than the existing keys, do I need to worry about the keys with stabilizer bars? That is, should the existing bars work with the new caps?

Lamaboi wrote:I wired the rest last friday and received an invoice today again, what's up with that?

7bit wrote:LOL!

You posted your own e-mail address.

Also, the invoice number should be sufficient.



edit:

Also, everyone knows that it is:
R4 0001 7bit

OddOne wrote:So, I'm thinking about placing an order for a Retro 87 key set with the RGBY symbols. My question is, what is the difference between: RETRO/TKLRGBYSYM & RETRO/TENKLESSRGBYSYM

Based on the wiki I think I would want the TKLRGBYSYM, but I cannot find any info on the other to confirm this.

Also, to get the light grey space bar to match the alpha keys, I would just order RETRO/SPACE?

Thanks for the help in advance, OddOne

RETRO/SPACE                 |147|in stock    |$2
RETRO/SPACE/BLUE            | 32|in stock    |$2
RETRO/SPACE/GREY            | 43|sold out    |$2
RETRO/SPACE/RED             | 20|in stock    |$2
RETRO/SPACENEW              |  5|in stock    |$12
RETRO/SPACENEW/BLUE         |  1|in stock    |$12
RETRO/SPACEOLD              | 35|1 left      |$2
RETRO/SPACEOLD/GREY         |  7|in stock    |$6
RETRO/SPACEOLD/BLUE         |  3|in stock    |$6
RETRO/SPACEOLD/RED          |  2|in stock    |$6
RETRO/SPACE7BIT             |  5|in stock    |$4






.

JSchool wrote:Okay sent my address. So I just wait for the new invoice (made some changes) and then send the full thing to David or do I just send half or what?

What does RETRO/ALPHA/GREY look like anyway? Blue on light grey or blue on dark grey?