deskthority

Posted: **16 May 2013, 06:10**

If you want to delete an item, just set the quantity to 0:
Code: Select all
ITEM 0
To clear your entire order, please send this to CherryMX:
Code: Select all
CLEARALL

If you didn't receive any e-mail confirmation probably either your order had incorrect syntax or you didn't wait long enough (7bit takes about 1 day to process your order and send the e-mail).

Posted: **16 May 2013, 06:47**

F u r u y á wrote:
If you want to delete an item, just set the quantity to 0:
Code: Select all
ITEM 0
To clear your entire order, please send this to CherryMX:
Code: Select all
CLEARALL
If you didn't receive any e-mail confirmation probably either your order had incorrect syntax or you didn't wait long enough (7bit takes about 1 day to process your order and send the e-mail).

Thank you

Posted: **16 May 2013, 09:07**

photekq wrote:How can I cancel my order? I haven't been invoiced or even sent confirmation - I have only sent the PM.

Your e-mail was missing when you ordered.

Posted: **16 May 2013, 12:30**

Hey 7bit - I PM'd you earlier in the week but you must have missed it. You said you were going to be sending my order out last week but I still haven't seen anything and your previous packages haven't taken this long - has it (MX 0152) been sent and, if so, when?

Don't want my precious reds to get lost!

Cheers again

George

Posted: **16 May 2013, 12:32**

7bit wrote:
photekq wrote:How can I cancel my order? I haven't been invoiced or even sent confirmation - I have only sent the PM.
Your e-mail was missing when you ordered.

Weird. There's definitely an email address in the message I sent.

Posted: **16 May 2013, 13:08**

photekq wrote:
7bit wrote:
photekq wrote:How can I cancel my order? I haven't been invoiced or even sent confirmation - I have only sent the PM.
Your e-mail was missing when you ordered.

Weird. There's definitely an email address in the message I sent.

Yet another one:
email+1@dummymail.derp

Nevertheless, I've changed the script.

Posted: **17 May 2013, 04:25**

Got mine in the mail this week! Thanks for running a good buy!

Posted: **17 May 2013, 22:06**

Finally got my payment sent

.
Its gonna be a long 5 month or so wait

Posted: **20 May 2013, 00:17**

Why are you always extending the preorder period? You make it really hard to hold off myself from spending lots of money on stupid Cherry switches...

Posted: **20 May 2013, 01:36**

I'm STILL hoping you'll offer cherry microswitches someday... (DG23C1AA (~75g), and DG23B1AA (~150g))

Posted: **20 May 2013, 22:02**

Biernot wrote:Why are you always extending the preorder period? You make it really hard to hold off myself from spending lots of money on stupid Cherry switches...

Ask the GH60 people!

Also: what is wrong with cheap preorder prices a little longer?

Posted: **21 May 2013, 10:36**

And on the matter of GH60 orders, will I be notified when my switches (#0208) are sent to komar007 (I believe the EU organiser?). Or shall I trust it will be done in good faith?

Posted: **21 May 2013, 18:58**

7bit wrote:
Biernot wrote:Why are you always extending the preorder period? You make it really hard to hold off myself from spending lots of money on stupid Cherry switches...
Ask the GH60 people!

Also: what is wrong with cheap preorder prices a little longer?

The problem is there are these voices that tell me to buy switches. I was hoping they go away if I ignore them until the preorder period is over. --> Preorder still open, voices still there.

Posted: **24 May 2013, 02:41**

Payment/"shipping" update

Payments from tradet, ne0phyte, isman, listboss, shadowkillerdragon, thacapn, and rawrz00rz have been received and marked as shipped for Paypal purposes (to keep them from locking up the PP account). Invoices may or may not reflect the payments yet. Keep checking this thread for the actual ship date(s), or spam this thread/7bit via PM the message "WHERE ARE MY SWITCHES, DID YOU SEND THEM YET." This only includes payments to me via Paypal. Note that the address on your Paypal notifications/notes are not necessarily the addresses 7bit will ship your switches to, he ships to the address on your invoice.

Posted: **26 May 2013, 13:29**

Hello 7bit,

Do you have some updates on invoice #0197 ?

Thanks.

Posted: **26 May 2013, 21:24**

These long deadlines are great but result in lots of time to (over)think about things...
For switches that I ordered (over 100, which was stated to be free shipping on page 1 of this thread) I'd chosen the option of having them sent to the GH60 distributor rather than to me directly.
There's a bit of a discussion over there about shipping fees for GH60-related bits, sounds as though anyone with a bunch of switches will incur the top shipping fees (from Poland in my case as I'm in EU).
Shipping fees their end not excessive IMO, but I'm now thinking I'd actually be better off just having them shipped to me directly.
If so, I assume a case of submitting order again with full address but without the "gh60" line.
Does that make sense?

Posted: **26 May 2013, 21:28**

The idea was that the switches are being sent along your order GH60 parts, so there are no extra shipping costs. However, just send to CherryMX:

GH60 0

and submit your shipping address:
ADDRESS
your address

Posted: **27 May 2013, 14:48**

Hi folks! Can I order/preorder some MXCLEAR/NW and a few MXRED/NW here? And how much is it? Thanks.

Posted: **27 May 2013, 18:28**

Hey 7bit,

Just to confirm, shipping is 4EUR for international as well? Canada in my case. Also, to change my address from GH60, I should PM the following to cherry MX :

GH60 0
ADDRESS
<my shipping address>

and I'll be invoiced for the shipping cost? thanks

Posted: **27 May 2013, 19:01**

Hey 7bit,

Any chance to change the preorder (already paid) to pcb-mounted switches?
The GH60-man said that those plates do support pcb-mounted switches to get even more stability.

Posted: **27 May 2013, 19:09**

Netsu wrote:Hi folks! Can I order/preorder some MXCLEAR/NW and a few MXRED/NW here? And how much is it? Thanks.

MXCLEAR/NW are in stock* (0.65 EUR per switch) and MXRED/NW are on pre-order for 0.54 EUR per switch.

--------------------------------------------------------------------------------------------
*) The box arrived last week, but I did not even open it.

Posted: **27 May 2013, 19:11**

T0ken wrote:Hey 7bit,

Just to confirm, shipping is 4EUR for international as well? Canada in my case. Also, to change my address from GH60, I should PM the following to cherry MX :

GH60 0
ADDRESS
<my shipping address>

and I'll be invoiced for the shipping cost? thanks

Shipping is worldwide 4 EUR, no matter how many switches you order.

Posted: **27 May 2013, 19:12**

gruener_Salat wrote:Hey 7bit,

Any chance to change the preorder (already paid) to pcb-mounted switches?
The GH60-man said that those plates do support pcb-mounted switches to get even more stability.

I can change that for you, but you need to send your e-mail address to CherryMX.

Posted: **27 May 2013, 19:31**

gruener_Salat wrote:Hey 7bit,

Any chance to change the preorder (already paid) to pcb-mounted switches?
The GH60-man said that those plates do support pcb-mounted switches to get even more stability.

Yes, I read the same thing and now want PCB mounted switches as well.

So how does this work?

I sent a PM to the bot user "Cherry MX" and write one sentence saying "Please change all ordered switches from plate mounted to PCB mounted"?

Posted: **27 May 2013, 19:36**

Just order whatever you want and set the quantities of stuff you don't want to 0.

example

MXWHITEP 0
MXWHITEP/NW 69

(platemounted into pcb mounted)

Posted: **27 May 2013, 19:46**

mauri wrote:Just order whatever you want and set the quantities of stuff you don't want to 0.

example

MXWHITEP 0
MXWHITEP/NW 69

(platemounted into pcb mounted)

Thanks! I'll do that

Posted: **27 May 2013, 19:57**

LechnerDE wrote:
gruener_Salat wrote:Hey 7bit,

Any chance to change the preorder (already paid) to pcb-mounted switches?
The GH60-man said that those plates do support pcb-mounted switches to get even more stability.
Yes, I read the same thing and now want PCB mounted switches as well.

So how does this work?

I sent a PM to the bot user "Cherry MX" and write one sentence saying "Please change all ordered switches from plate mounted to PCB mounted"?

Sorry, but the AI module is still in development ...

Just order the NW-variants and set the others to 0.

Posted: **27 May 2013, 21:00**

7bit wrote:
Netsu wrote:Hi folks! Can I order/preorder some MXCLEAR/NW and a few MXRED/NW here? And how much is it? Thanks.
MXCLEAR/NW are in stock* (0.65 EUR per switch) and MXRED/NW are on pre-order for 0.54 EUR per switch.

--------------------------------------------------------------------------------------------
*) The box arrived last week, but I did not even open it.

I need following items:

Code: Select all

280 - MXCLEAR/NW
16  - MXRED/NW

with delivery it to Ukraine. ASAP

So, how much is it together, and how could I pay for it?
Also in which way can be delivery made? Sorry my poor English.

Posted: **27 May 2013, 21:11**

7bit wrote:
LechnerDE wrote:
gruener_Salat wrote:Hey 7bit,

Any chance to change the preorder (already paid) to pcb-mounted switches?
The GH60-man said that those plates do support pcb-mounted switches to get even more stability.
Yes, I read the same thing and now want PCB mounted switches as well.

So how does this work?

I sent a PM to the bot user "Cherry MX" and write one sentence saying "Please change all ordered switches from plate mounted to PCB mounted"?
Sorry, but the AI module is still in development ...

Just order the NW-variants and set the others to 0.

Yeah, I know the Bot wouldn't be this intelligent, but I thought this might create an error message, which would make you look at it manually

Nevermind!

Posted: **28 May 2013, 11:16**

Netsu wrote:I need following items:
Code: Select all
280 - MXCLEAR/NW
16  - MXRED/NW
with delivery it to Ukraine. ASAP So, how much is it together, and how could I pay for it?
Also in which way can be delivery made? Sorry my poor English.

Please send this to CherryMX (as a personal message):

MXCLEAR/NW 280
MXRED/NW 16
email@youremail.address

Then follow instructions!

deskthority

Cherry MX and Matias switches