Page 360 of 517

Posted: 06 May 2016, 09:33
by rominronin
I wish there was a way SP could improve their SA moulds to accommodate quicker, cheaper production, with a lower quantity requirement.

Re: Round 5 and 6! Deadline: 2016-05-08 :roll:

Posted: 06 May 2016, 09:35
by eddible
rominronin wrote:I wish there was a way SP could improve their SA moulds to accommodate quicker, cheaper production, with a lower quantity requirement.
Especially considering how popular every set they do ends up being! I can only assume that the equipment involved is incredibly custom and expensive meaning even with us lot throwing money at them, it wouldn't pay itself off for ages.

Posted: 06 May 2016, 10:03
by 7bit
gtxorb wrote:
7bit wrote: What do you mean?
:?
haha, I mean since Round 6 Phase 2 is not in production or paid, is it able to put new order? :D :D
At least they got a payment to cover at least one of the colors (white, red, grey or black), plus we will send another payment next week that covers almost everything except one color.

Posted: 06 May 2016, 10:17
by 7bit
Google Wallet or PayPal collector wanted!!!
Google Wallet or PayPal collector wanted!!!
Google Wallet or PayPal collector wanted!!!
Google Wallet or PayPal collector wanted!!!
:shock:

You need to have an US bank account to participate in this contest!
:o

BTW: You can only pay to mashby until 2016-05-10!
:shock:

I've updated the wiki:
Round 5 (in stock)
Round 6 (in production)

:ugeek:

Posted: 06 May 2016, 11:30
by kingnestea
7bit wrote:
gtxorb wrote:
7bit wrote: What do you mean?
:?
haha, I mean since Round 6 Phase 2 is not in production or paid, is it able to put new order? :D :D
At least they got a payment to cover at least one of the colors (white, red, grey or black), plus we will send another payment next week that covers almost everything except one color.
would you look into my issue?I've sent you a PM with a screenshot of the confirmation mail from mashby for the payment of ID:pangxxhi,I've placed 4 orders with 4 different ID's for my friends, all of them are now updated as paid, except the one for pangxxhi

Posted: 06 May 2016, 15:13
by c2lknt
eddible wrote:
rominronin wrote:I wish there was a way SP could improve their SA moulds to accommodate quicker, cheaper production, with a lower quantity requirement.
Especially considering how popular every set they do ends up being! I can only assume that the equipment involved is incredibly custom and expensive meaning even with us lot throwing money at them, it wouldn't pay itself off for ages.
Agreed. My guess is they don't trust that the wave of interest in SA is more than a temporary fad. It would be a big investment for them, and it would hurt a lot of everyone got tired of SA all of a sudden.

That or they just don't have theb time/money/people. It's a pretty small operation.

And the final possible explaination is that we (mech keyboard hobbyists) just aren't their core business. They may not actually give a crap about pushing out more caps to satisfy our craving. What they fail to understand is that, unlike their industrial clients, our caps make us happy! Sort of.

My guess is it's a little of all three of these.

Posted: 06 May 2016, 16:04
by maximm
Hi, some of the items in my order im paying for today are gone from the Wiki. Are those marked for me, or did someone else buy them?

Posted: 06 May 2016, 16:09
by eddible
If I want to add an extra key to an existing order, is there a particular way to PM the bot?

Posted: 06 May 2016, 16:18
by maximm
I want to pay my invoce but when paying it is asking for Adress. What should i put there?

I just put in the bank name, hope thats ok.

Posted: 06 May 2016, 17:10
by BrewingHeavyWeather
maximm wrote: Hi, some of the items in my order im paying for today are gone from the Wiki. Are those marked for me, or did someone else buy them?
If they show up in your emailed invoice's top two sections, they'll be yours.
c2lknt wrote: And the final possible explaination is that we (mech keyboard hobbyists) just aren't their core business. They may not actually give a crap about pushing out more caps to satisfy our craving. What they fail to understand is that, unlike their industrial clients, our caps make us happy! Sort of.
While I have a hard time imagining it would be profitable enough as a core business, satisfying these GBs, and creating, maintaining, and marketing PMK has to cost enough that it's also hard to imagine they really don't care.

Posted: 06 May 2016, 17:46
by maximm
Awesome
Looking forward to the following TKL items

Order-ID |Description |Price|Qty|Pcs| Total
HONEYB/TKLISOBASE/VIOLETT|TKL ISO base violett kit|79.00| 1| 39| 79.00
HONEYB/ALPHA/E/WHITE |ALPHA white extra kit |65.00| 1| 49| 65.00
HONEYB/INTER/WHITE |Inter kit (DE,DK,NO,SE) |39.00| 1| 41| 39.00
HONEYB/SPACE625/WHITE |Space (6.25u; white) | 5.00| 1| 1| 5.00
HONEYB/CURSORBASE/WHITE |Cursor base white kit |12.00| 1| 9| 12.00
HONEYB/CURSOR/R34/WHITE |Cursor kit (row 3/UP:4) | 6.00| 1| 4| 6.00
HONEYB/LOTUS175/VIOLETT |lotus flower (row 3) | 6.00| 1| 1| 6.00
HONEYB/ESCAPE/RED |ESCAPE (row 1, 1 unit) | 2.00| 1| 1| 2.00
HONEYB/R1U100/VIOLETT |blank key (violett) | 1.00| 1| 1| 1.00

Extras for another board
HONEYB/JRET/RED |ISO-RETURN key | 8.00| 1| 1| 8.00
HONEYB/SHIFT175/BLACK |SHIFT (row 4, 1.75u) | 5.00| 1| 1| 5.00

Posted: 06 May 2016, 21:11
by ipreferpie
Hey 7bit, I've been getting an invoice that I still owe $76.96, which I already paid on Apr 27. I've PM'd you the details, but still no response yet. Can you check w/ mashby and make sure it's all square?

Posted: 06 May 2016, 22:18
by khongthenhuvay
ipreferpie wrote: Hey 7bit, I've been getting an invoice that I still owe $76.96, which I already paid on Apr 27. I've PM'd you the details, but still no response yet. Can you check w/ mashby and make sure it's all square?
I have the same problem, too

Posted: 07 May 2016, 05:43
by Gray Jian
maximm wrote: I want to pay my invoce but when paying it is asking for Adress. What should i put there?

I just put in the bank name, hope thats ok.
@maximm Maybe that's not OK. You put the bank name as address, that meant you marked the money as being for bought goods. "Mark the money as being paid for a service", you should pay without address.

Posted: 07 May 2016, 07:51
by khongthenhuvay
Round 6 - Phase 1 (SA)
Status: Remakes in production
Comments: New artwork received for keys made incorrectly. Completion TBD.

Bad news :(. How many keys have to remake?

Posted: 07 May 2016, 08:24
by maximm
Gray Jian wrote:
maximm wrote: I want to pay my invoce but when paying it is asking for Adress. What should i put there?

I just put in the bank name, hope thats ok.
@maximm Maybe that's not OK. You put the bank name as address, that meant you marked the money as being for bought goods. "Mark the money as being paid for a service", you should pay without address.
I used the code 462 Other Services with my payment

Posted: 07 May 2016, 09:06
by Wodan
khongthenhuvay wrote: Round 6 - Phase 1 (SA)
Status: Remakes in production
Comments: New artwork received for keys made incorrectly. Completion TBD.

Bad news :(. How many keys have to remake?
7bit kept telling us there's some remakes to be done. Isn't it good news they're supposed to be in production?

Posted: 07 May 2016, 09:27
by mrbill
Even if you've ordered R5 leftovers and requested that they ship separately, you'll end up waiting months and months for those too... :(

2-3 times I've seen 7bit say that they were shipping soon, after he got back from vacation, etc, but ... nothing.

Has anyone received R5 leftovers that they ordered at the same time as R6, *and* requested that they ship on their own?

Posted: 07 May 2016, 09:45
by khongthenhuvay
Wodan wrote: 7bit kept telling us there's some remakes to be done. Isn't it good news they're supposed to be in production?
No offense to 7bit, just sharing info and you are right. It is both bad and good news.

- Good: Bad keys will be remaked.
- Bad: Bad keys could be numerous. We have to wait more and more :D

Posted: 07 May 2016, 10:02
by Wodan
#1 rule of 7bit GBs:

Time is relative

Posted: 07 May 2016, 10:58
by khongthenhuvay
Wodan wrote: #1 rule of 7bit GBs:

Time is relative
I will start searching eBay for a time machine now :idea:

Posted: 07 May 2016, 12:15
by maximm
When can i expect my R6 keys to be shipped? This year?

Posted: 07 May 2016, 16:39
by McPwned
mrbill wrote: Has anyone received R5 leftovers that they ordered at the same time as R6, *and* requested that they ship on their own?
Almost. I received R5 leftovers that I ordered at the same time as R6, but requested that they ship together.

Posted: 08 May 2016, 00:54
by rominronin
Oh! I didn't realise that round 6 has been received by customers already. Is there a thread for showing them off? I would like to see something like the cappening thread for the round 6 caps.


Even reviving the cappening thread would satisfy...

Re: Round 5 and 6! Deadline: 2016-05-10 :roll:

Posted: 08 May 2016, 06:10
by caligo
No, no one has any R6 keys yet (not even 7bit, as far as I know). R5 leftovers ≠ R6. The same old Round 5 caps that are already being shown of in the cappening thread, in other words.

Sent from my Moto X using Tapatalk

Posted: 09 May 2016, 05:15
by CollinMel
Hey 7bit - I just received an invoice for $15.00, but already paid this amount on May 1st via Google Wallet. Please check your records and update my order accordingly. Thanks :)

Posted: 09 May 2016, 08:46
by kennyv2k
Hey 7bit In May 6th through PayPal to pay $230.88 in orders, please check your payment record and update my order. thank !

Posted: 10 May 2016, 09:22
by 7bit
I still wait for mashby to send an update.
:roll:

Google Wallet or PayPal collector wanted!!!
Google Wallet or PayPal collector wanted!!!
Google Wallet or PayPal collector wanted!!!
Google Wallet or PayPal collector wanted!!!
:cry:

Posted: 10 May 2016, 16:16
by mecano
mrbill wrote: Has anyone received R5 leftovers that they ordered at the same time as R6, *and* requested that they ship on their own?
Yes I did.

Posted: 10 May 2016, 16:20
by mecano
7bit wrote: Phase one: SPH-grey, BLUE, VIOLETT, CREAM and CADET <--- finished, but some errors must be corrected :cry:
Details of mistakes?