BTC 5100C...

y11971alex · 15 Nov 2016, 20:28

^the stupid box that cost me $60 to ship to Canada

^the stupid box again

^ this is my biggest gripe with the keyboard. It clearly says "AT" on the sticker visible in the image, but it uses this 240* terminal connector that my Soarer's converter, which orihalcon wired for Set 3 scan codes, can't understand!

http://www.ebay.com/itm/222279535810
^ from this seller, so purchase at own risk

As you can see, the seller included a black connector that isn't included with the package.

Chyros · 16 Nov 2016, 03:59

Hmmmm, does it work if you upload an AT set to it instead?

y11971alex · 16 Nov 2016, 04:02

Chyros wrote: Hmmmm, does it work if you upload an AT set to it instead?

I'd love to try it, but I don't know which five pins is the converter supposed to sense (as you can see, there are six pins)

ohaimark · 16 Nov 2016, 04:17

It'd be worth nosing around those PCBs a bit more. Looks like it's a 4 pin header from the main PCB that goes to some sort of strange converter daughterboard... Wouldn't it be ironic if we're trying to convert a converter?

There may even be labeled Clock, Voltage, Data, and Ground pins under that mess.

y11971alex · 16 Nov 2016, 04:24

Should I do a "force Set2" upload to the converter?

If I connect it to my soarer's converter meant for the F122, it actually defaults to Set1, or XT, but fails to read any output.

seebart · 16 Nov 2016, 10:11

Interesting, we'll see if mine is the same when I get it in 3-16 months.

y11971alex · 16 Nov 2016, 22:34

It appears the seller omitted to send the converter that he included in the picture of the auction! I contacted him, and he has dispatched it. We'll see how this thing functions when it, well, functions.

y11971alex · 19 Nov 2016, 05:49

hkrak · 19 Nov 2016, 23:58

I have one of these incoming from the same seller as you bought from y11971alex.

Does anyone actually know anything about that pin layout, other than the pictures and references found on wikipedia?
I have googled some and in general there's few results, and absolutely nothing on any kind of adapter. Hopefully the seller included the adapter in the picture with the board, but I'm not getting my hopes up.

ohaimark · 20 Nov 2016, 00:06

How do the domes feel? Pretty good?

y11971alex · 20 Nov 2016, 00:07

According to my information, that cable is actually a DIN-6 to DIN-6 extension cable

hkrak · 20 Nov 2016, 00:27

y11971alex wrote: According to my information, that cable is actually a DIN-6 to DIN-6 extension cable

The black angled cable in the ebay picture? Well, that won't be helpful.

/edit
Well Amstrad has used this kind of connector at least.

Spoiler:

/edit2
And a picture of the PCB of a PS/2 version that lacks the funky daughterboard.

Spoiler:

y11971alex · 22 Nov 2016, 08:13

Mwahahahaha

I reviewed the seller's product, saying that it has DIN-6 instead of DIN-5. Before long, the seller relisted the item to get rid of my review. Then, I reposted my review. Within a few minutes, the seller relisted again, but finally included a photograph of the DIN-6 connector.

The y11971alex vexatious reviewing strategy triumphs!

hkrak · 23 Nov 2016, 14:07

Have you received the black cable in the item picture btw? I got my keyboard today, and its the same 6-pin DIN connector. No black cable included.

y11971alex · 23 Nov 2016, 16:12

hkrak wrote: Have you received the black cable in the item picture btw? I got my keyboard today, and its the same 6-pin DIN connector. No black cable included.

I haven't, but wannabe from GH said the cable was merely a DIN-6 to DIN-6 extension cable.

hkrak · 23 Nov 2016, 16:30

I see.

Looking at the PCB from the PS/2 version, it seems that the only difference on our boards is the additional daugtherboard. It is soldered onto a standard 4-pin connector (or what you call it) that is directly used on the PS/2 version. I don't have a soldering iron, but I'll probably look into desoldering the daughterboard it and connect a PS/2 cable from another device.

Btw, the board feels okay for a rubberdome, except the left shift key. The stabilizing is completely bonkers.

y11971alex · 23 Nov 2016, 16:38

hkrak wrote: I see.

Looking at the PCB from the PS/2 version, it seems that the only difference on our boards is the additional daugtherboard. It is soldered onto a standard 4-pin connector (or what you call it) that is directly used on the PS/2 version. I don't have a soldering iron, but I'll probably look into desoldering the daughterboard it and connect a PS/2 cable from another device.

Btw, the board feels okay for a rubberdome, except the left shift key. The stabilizing is completely bonkers.

Good idea! Tell me how it works out, and perhaps I can do a similar mod.

hkrak · 25 Nov 2016, 20:04

Success!

I desoldered the daughterboard, cut the DIN-6 connector off, and handwired an old DIN-5 cable to the original cable. Connecting the cable directly to the PCB then worked flawlessly.
Gonna make a more permanent solution soon, this was just for testing.

robbles · 02 Dec 2016, 03:55

hkrak wrote: Success!

I desoldered the daughterboard, cut the DIN-6 connector off, and handwired an old DIN-5 cable to the original cable. Connecting the cable directly to the PCB then worked flawlessly.
Gonna make a more permanent solution soon, this was just for testing.

This is awesome news! I am also a victim of this seller.

If I cut the connector off and used PS/2 this diagram and Amstrad's diagram as reference, I should be able to solder on a new PS/2 connector with no issues? I was really excited to try this thing out.

Spoiler:

hkrak · 02 Dec 2016, 15:07

robbles wrote: If I cut the connector off and used PS/2 this diagram and Amstrad's diagram as reference, I should be able to solder on a new PS/2 connector with no issues? I was really excited to try this thing out.
Spoiler:

It might work, but I'm not sure which protocol the daughterboard actually outputs. Even though the connector is identical to one Amstrad used, it might be something entirely different.

I would recommend doing what I did (since I know it works), but if you're feeling adventurous go ahead.

robbles · 04 Dec 2016, 04:45

Just ordered a Teensy and a couple of usb plugs to attempt Soarer's converter mod workshop-f7/xt-at-ps2-terminal-to-usb-c ... tml#p44606.
Going to try to keep the original cable. I'll keep everyone posted.

Has anyone tried to lube this thing? You think it would be worth it?

y11971alex · 04 Dec 2016, 05:36

I think it's phenomenally smooth as it stands. It's on par with the Model M as far as I'm concerned.

henkelfire · 11 Dec 2016, 00:48

hkrak wrote: Success!

I desoldered the daughterboard, cut the DIN-6 connector off, and handwired an old DIN-5 cable to the original cable. Connecting the cable directly to the PCB then worked flawlessly.
Gonna make a more permanent solution soon, this was just for testing.

I'm attempting the same mod. I desoldered the daughterboard, reattached the cable connector to the board, and snipped off the 6-pin connector to attach a ps/2 connector. But I'm having trouble identifying the pins on the main board. Do you think you could label the pins for me or list them out top to bottom?

robbles · 11 Dec 2016, 19:54

henkelfire wrote:
hkrak wrote: Success!

I desoldered the daughterboard, cut the DIN-6 connector off, and handwired an old DIN-5 cable to the original cable. Connecting the cable directly to the PCB then worked flawlessly.
Gonna make a more permanent solution soon, this was just for testing.
I'm attempting the same mod. I desoldered the daughterboard, reattached the cable connector to the board, and snipped off the 6-pin connector to attach a ps/2 connector. But I'm having trouble identifying the pins on the main board. Do you think you could label the pins for me or list them out top to bottom?

Currently in the same spot.

hkrak · 11 Dec 2016, 23:46

Actually, I did not determine what each pin is, as I just soldered the existing cable to another DIN cable I had lying around. I assumed red was vcc and black ground, and got lucky with the last two. Seems common that white is clock though, which means green is data, but don't take my word for it.

Sorry I can't be of more help, I'll know more when I get the PS/2 connector I ordered, then I'll open up the old DIN one.

robbles · 12 Dec 2016, 01:05

Went ahead and opened the 6-pin connector myself. The connector was filled with glue, so seeing which wires connected to which pins was impossible. Pulling off the rubber glue tore all the wires off the leads. It appears the connector does not follow the pin layout shown in the Amstrad PC1512 diagram previously mentioned.

Is there a way to identify the pins from the keyboard PCB using a multimeter? I'm not that handy or experienced, but it seems like it would be possible. I can borrow a multimeter from a friend tonight if someone wants to fill me in on how to properly identify the pins using it.

: Wire order on cable connector, left to right: Green, White, Yellow, Red.; IMG_2245.JPG.jpeg (917.67 KiB) Viewed 10694 times

: Opened 6-pin connector with nasty glue.; IMG_2247.JPG.jpeg (1.08 MiB) Viewed 10694 times

: Close up. Does not follow Amstrad PC1512 pin layout.; IMG_2249.JPG.jpeg (1.03 MiB) Viewed 10694 times

henkelfire · 12 Dec 2016, 01:29

This is the result I got from testing.
I hooked it up with alligator clips to a PS2 to USB adapter board with labeled pins. Then I stuffed everything inside and I now have and internally converted BTC 5100c keyboard.

I hope this helps, and let me know if this is horribly wrong. This is my first electronics project.

robbles · 12 Dec 2016, 02:38

henkelfire wrote:
Spoiler:
/spoiler]

This is the result I got from testing.
I hooked it up with alligator clips to a PS2 to USB adapter board with labeled pins. Then I stuffed everything inside and I now have and internally converted BTC 5100c keyboard.

I hope this helps, and let me know if this is horribly wrong. This is my first electronics project.

Your layout worked! Typing from they keyboard now!

hkrak · 12 Dec 2016, 10:15

I see I mixed up the colors a bit, glad you got it working in the end!

robbles · 15 Dec 2016, 06:14

robbles wrote:
henkelfire wrote:
Spoiler:
This is the result I got from testing.
I hooked it up with alligator clips to a PS2 to USB adapter board with labeled pins. Then I stuffed everything inside and I now have and internally converted BTC 5100c keyboard.

I hope this helps, and let me know if this is horribly wrong. This is my first electronics project.
Your layout worked! Typing from they keyboard now!